Eco-Friendly Packaging

Three Practical Boundaries of Packaging “Recycled Content” Claims: Calculation Basis / Transaction Certificates / Third-Party Verification — The First Three Questions to Ask When a Printer Receives an Order Saying, “Label This Batch as 50% Recycled”

📅 2026-11-08 ✍️ Wuxi Lexiang Printing & Packaging ⏱ 3min read

💡 💡 At a Glance

Three practical boundaries of packaging recycled-content claims. ① Calculation basis—the same “50%” can differ by more than ten percentage points. Method 1 uses the total weight of the finished product: a 180 g box contains 130 g of paper with 65 g of recycled fiber, while the remaining 50 g of ink and adhesives does not follow the paper recycling stream and is excluded, resulting in approximately 36%. Method 2 uses recyclable fiber material and is the standard method for many recycled-material suppliers. Method 3 applies the claim to a single material. If the contract does not define the basis, the supplier’s fiber-basis figure may not match the printer’s total-weight calculation, making the claim inaccurate. Percentages must also not be added across different material systems: plastic and paper have different recycling channels. The figure printed on the claim, the contractual method, and the supporting evidence must be consistent. ② Transaction certificate chain—recycled material moves from waste recycler to pelletizer or recycled pulp mill, paper mill, distributor, and printer, with every ownership transfer supported by a transaction certificate (TC). A paper mill’s single statement covers only its own transaction and cannot prove that upstream material genuinely came from waste. That statement may support an informative claim, but traceable content claims or third-party verification require a complete chain; a missing link means part of the percentage cannot be supported. The printer is often further downstream than customers assume but is often assigned responsibility, so quotations and order confirmations should state that “the claim is based on the accompanying transaction certificate chain and the printer does not independently verify the source.” ③ Third-party verification—recycled material without certificates may be used but cannot be claimed. There are three tiers: informative wording, which is generally permitted; quantitative claims, which require a calculation basis and supporting documents and may be reviewed under EU environmental-claim rules, US state green-marketing rules, and California recycled-content requirements; and third-party certification such as GRS, which is the strongest and most expensive tier but allows downstream companies in the certified chain to use upstream content conclusions. Printers generally do not need their own certification but need a complete chain, while brand owners making direct consumer claims may need their names on the certificate. Labeling execution also matters: place the figure, calculation basis, and certification mark together and avoid undefined modifiers. “Recycled fiber,” “recyclable material,” and “recycled material” have different regulatory meanings, and misuse is a frequent reason for shipments being detained. Ask three figures in an inquiry: the calculation basis, the completeness and traceability of every transaction certificate, and whether third-party certification backing is required.

In June 2026, a home-textile customer approached us with a document.

“We need to print this recycled-content claim on the box.”

We took the document and reviewed it. It was a supplier statement reading, “This packaging contains 50% recycled fiber content.”

The customer asked, “Is it enough just to print it?”

We asked, “Is this 50% calculated by the weight of the entire box, or by the paper inside it?”

The customer was taken aback. “Does it make a difference?”

“A very significant one.”

We showed the customer the weight composition of the box. The box weighed 180 grams in total, of which 130 grams was paper. According to the supplier, the recycled fiber content of that paper was 50%, or 65 grams. The remaining 50 grams consisted of ink and adhesives used for printing, lamination, hot stamping, and gluing. By industry convention, these materials are not included in “recycled content” because they are not fiber materials and do not follow the paper recycling stream.

“So, when calculated by total weight,” we explained, “the box actually contains 65 divided by 180, or approximately 36% recycled fiber.”

The customer said, “That is a substantial difference.”

“That is why the calculation basis must be fixed in the contract,” we said.

The customer asked, “If we label it as 36%, does that mean it is less environmentally friendly?”

“That is not an issue of environmental friendliness; it is an issue of labeling accuracy,” we said. “An accurate claim is meaningful. An inaccurate claim may be treated as misleading advertising in the European Union.”

The First Boundary: Definition of the Calculation Basis — The Same “50%” Can Differ by More Than Ten Percentage Points

This calculation basis should be clarified first because it is the easiest source of problems and the easiest to avoid during order discussions.

In practice, “recycled content” can be calculated in at least three ways:

Method 1: Calculated by the total weight of the finished product. The weight of materials containing recycled components within the entire package is divided by the total weight of the finished package. In the example above, the result is 36%. This is the most conservative method. Customers and consumers will interpret it as asking what proportion of the entire box is derived from recycled material.

Method 2: Calculated by the fiber portion. Recycled fiber is expressed as a percentage of the “recyclable fiber material” denominator. This is the most common industry method and is also how many recycled-material suppliers report their figures: the recycled proportion is measured at the pulp level, and if the pulp contains 50% recycled fiber, the paper made from that pulp is also treated as 50% recycled fiber.

Method 3: Calculated for a single material. For example, the sheet used for the lid might be 100% recycled, while the sheet used for the box body might be 30%, and the claim applies only to one of those materials.

The customer asked, “Which one is correct?”

“None is inherently correct; it depends on how the claim is worded,” we said. “However, three things must be consistent: the figure printed on the claim, the calculation method agreed in the contract, and the supporting documentary evidence must all match. If these three do not align, problems will arise.”

A common practical mistake looks like this: the supplier reports 50% on a fiber basis, which is not inherently problematic because it is the supplier’s standard method. The customer’s contract states “recycled content shall be no less than 50%” without specifying the calculation basis. The printer calculates by total weight and finds only 36%. The printer then either argues with the supplier, or the customer says, “The supplier said 50%, so it is 50%.” The claim printed on the box ultimately does not match the actual situation.

There is also a more subtle problem: using the wrong material system when adding percentages together. If the customer intends to claim that “the plastic portion of this packaging is recycled,” that figure cannot be added to the paper’s recycled-content rate. The two have different recycling channels, and a combined figure has no regulatory significance.

Therefore, the first figure to ask for is: the calculation basis for recycled content—whether it is based on the total weight of the finished product, recyclable fiber material, or a single-material claim.

The Second Boundary: The Transaction Certificate Chain — Every Transfer of Ownership Requires Corresponding Evidence

The second boundary is the backbone of the claim and is also the one most frequently overlooked.

The logic is as follows:

Before recycled material becomes packaging, it generally passes through several parties: a waste recycler, a pelletizer or recycled pulp mill, a paper mill that converts the material into paper, a packaging-material distributor, and finally the printer that converts the material into packaging. For every transfer of ownership, there should theoretically be a document proving that “the material purchased in this transaction is recycled material.” Together, these documents form the transaction certificate (Transaction Certificate, TC) chain.

The customer asked, “Is one piece of evidence proving that this batch of paper is recycled material not enough?”

“A paper mill can provide a conformity statement saying that the batch is 50% recycled,” we said. “That can prove that what the paper mill delivered to you is recycled paper. It cannot prove that the material upstream of the paper mill genuinely originated from waste, because the paper may be labeled recycled while the recycling facility delivered something else.”

“What is the difference between the two?” the customer asked.

“The difference lies in the strength of the claim. With only the paper mill’s statement, you can often explain that ‘we used recycled material.’ But if you need a traceable content claim—for example, GRS-certified content traceability or a third-party verified content report required by the customer—you need a complete transaction certificate chain that can be matched from one link to the next. If one link is missing, part of the percentage cannot be supported.”

We have encountered the following situation in practice: a customer receives a certificate for recycled paper that states the recycled proportion, but the customer needs to make its own content traceability claim and therefore requires a complete certificate chain from source to finished product. When the printer asks the paper mill for it, the paper mill says that its upstream supplier only provides certificates up to a certain level and that it does not have anything further upstream. At that point, there are two options: declare the proportion that can actually be supported, which is lower but defensible, or continue tracing upstream, which takes time and money and may ultimately fail.

The customer asked, “Can I print a lower percentage on the box?”

“Yes, and that is the only prudent approach.”

Another point of experience is worth mentioning: the printer’s position in this chain is often further downstream than the customer assumes, yet responsibility is frequently assigned to the printer. The customer contracts with the printer to make the claim. The printer then asks the material supplier for the material, and the supplier says it cannot provide the figure. At that point, the printer must either refuse or take responsibility for a figure it cannot substantiate. Our current practice is to state the following explicitly in quotations and order confirmations: “The recycled-content claim is based on the accompanying transaction certificate chain; the printer does not independently verify the source.” This is not shirking responsibility; it is defining the boundary clearly.

Therefore, the second figure to ask for is: whether transaction certificates are complete for every link in this batch and how far the material can be traced back to its source.

The Third Boundary: Third-Party Verification — Recycled Material Without Certificates Cannot Be Used, but It Cannot Be Claimed

The third boundary is the one customers ask about most often, so we will explain it in full here.

The customer asked, “We do not have GRS certification. Can we still write ‘contains recycled material’ on the packaging?”

“Whether you can write it depends on the market and the wording used,” we said. “We view this in three tiers.”

Tier 1: Informative wording. For example, “Some materials in this packaging are sourced from recycling and regeneration.” This type of wording is permitted in most markets, but it is qualitative and vague and does not constitute a quantitative claim that can be challenged.

Tier 2: Quantitative claim. For example, “This packaging contains 50% recycled material.” This is a specific, challengeable figure. It must have a stated calculation basis and supporting documents, and in certain jurisdictions it is a commercial claim subject to review. The European Union has rules governing environmental claims, some US states have specific provisions for green marketing, and California has more detailed requirements for recycled-content claims.

Tier 3: Third-party certification backing. For example, a GRS-certified recycled-content claim or third-party verification designated by the customer. This is the strongest and most expensive tier: it requires certification, surveillance audits, and the maintenance of a transaction certificate system in accordance with the standard.

The customer asked, “If we do not have GRS, are we limited to Tier 1?”

“Not necessarily,” we said. “If your supplier is GRS-certified and the transaction certificate chain for this batch is complete, you can use the supplier’s certification to support your claim. One of the values of GRS certification is that it allows downstream businesses within the certified chain to use the content conclusion, provided that this link is recorded on the transaction certificate. This is a central mechanism in the design of standards such as GRS: certification is not a label attached to one sheet of paper; it is a pass issued to the entire chain.”

“So we do not need to obtain our own certification?”

“That depends on your business model,” we said. “If you are a printer that only performs conversion and labeling, you generally do not need your own certification; you need a complete chain. If you are a brand owner making claims directly to consumers, many customers will instead require your company’s name to appear on the certificate. In that case, you would need to consider obtaining your own certification or joining the customer’s certification system.”

One practical point should be added here: the execution of the labeling also requires care. In some markets, regulators consider where the percentage appears on the box, how large the font is, and whether unqualified modifiers such as “environmentally friendly recycled” or “green recycled” have been added. As a practical approach, we recommend placing the figure, calculation basis, and certification mark together and omitting modifiers whenever possible.

Therefore, the third figure to ask for is: whether the customer requires GRS or another form of third-party certification backing and how the claim should be worded on the packaging.

Turning These Three Points into a Single Order Requirement

Finally, we come to implementation. We compress this framework into one line on the order confirmation for recycled-material orders:

“Recycled-content claim: calculation basis: 【based on recyclable fiber material / based on total weight of the finished product】; target value: 【X%】; basis of evidence: 【supplier conformity statement + list of transaction certificate numbers】; third-party certification: 【GRS certificate number / none】; labeling location: 【layout position】; no modifiers added.”

This line contains six blanks. Each blank completed reduces the possibility of a dispute by half.

The customer later sent us a message: “Your line on the order was something our procurement and legal departments revised three times before finalizing.”

We replied, “That is normal. Once this figure is printed on packaging, it is no longer only a procurement matter.”

“I understand,” the customer said. “Last time, we printed the wrong term. We wrote ‘recyclable material’ instead of ‘recycled fiber.’ Just four characters were different, and the authorities in France said we had misled consumers. The entire shipment was held at the port.”

“How was it ultimately resolved?”

“We applied correction labels and reprinted the packaging.”

This illustrates one point: the risk associated with a recycled-content claim does not lie in printing the wrong number, but in using the wrong terminology. An incorrect number is a labeling error; an incorrect term is a compliance issue. Therefore, among the six blanks on the confirmation form, the blanks for the “calculation basis” and “third-party certification” are precisely the ones that cannot be omitted.

Further Reading

The following articles address the material-side issues involved in recycled-content claims in greater detail:

#Recycled Content Claims #Transaction Certificates #GRS #Packaging Sustainability #Recycled Materials #Green Claims

FAQ

Should recycled content be calculated by total weight or by fiber weight? Can the two methods differ significantly?

Yes, the difference can be substantial and may exceed ten percentage points. Consider this example: a package weighing 180 grams contains 130 grams of paper, with the paper’s recycled fiber content reported on a fiber basis as 50% (65 grams). The remaining 50 grams consists of ink and adhesives used for printing, lamination, hot stamping, and gluing. These are not fiber materials and do not follow the paper recycling stream, so industry convention excludes them from recycled fiber content. The fiber-basis figure is therefore 50%, while the total-weight figure is 65÷180, or approximately 36%. The contract must expressly fix the calculation basis; otherwise, the figure reported by the supplier, which is usually based on fiber weight, will not match the figure calculated by the printer, which is often based on total weight, and the claim will be inaccurate. The key is not which method is selected, but that the figure printed on the claim, the method stipulated in the contract, and the supporting evidence are consistent.

If the customer wants proof that this batch of paper is recycled material, is a supplier conformity statement sufficient?

It is sufficient to prove that the paper mill delivered recycled paper, but not to substantiate recycled content across the entire chain. The difference lies in the strength of traceability. Recycled material passes through a waste recycler, pelletizer or recycled pulp mill, paper mill, material distributor, and ultimately the packaging manufacturer. Each transfer of ownership theoretically requires a corresponding transaction certificate, and these documents must be matched to establish the full chain. A single statement from the paper mill covers only the paper mill’s own transaction. If the customer merely needs to state that recycled material was used, the paper mill’s statement is generally adequate. If the customer needs a content traceability claim or traceability for third-party certification, a complete certificate chain from source to finished product is required. If one link is broken, part of the percentage cannot be supported. In practice, also note that percentages must not be added across the wrong material systems: the recycled rate for plastic cannot be added to that for paper because they follow different recycling channels.

We do not have GRS certification. Can our packaging still say ‘contains recycled material’?

Yes, but the answer depends on the tier. Tier 1 consists of informative wording such as ‘Some materials in this packaging are sourced from recycling and regeneration.’ This is permitted in most markets and does not create a challengeable quantitative claim. Tier 2 consists of quantitative claims such as ‘contains 50% recycled material,’ which require a calculation basis and supporting documents and may be reviewed under the European Union’s environmental-claim rules, green-marketing provisions in certain US states, and California’s recycled-content requirements. Tier 3 involves third-party certification backing, such as GRS or a customer-designated verification body. It is the strongest and most expensive tier and requires certification, surveillance audits, and maintenance of a transaction certificate system. A key GRS mechanism allows downstream companies in the certified chain to use upstream content conclusions, provided that the link is recorded on the transaction certificate. Printers therefore generally do not need their own certification; they need a complete chain. Brand owners making claims directly to consumers may, however, be required to have their own names on the certificate and may need to obtain certification or join the customer’s system.

What details are easy to get wrong when making the claim?

There are three common pitfalls. First, modifiers: undefined terms such as ‘environmentally friendly recycled,’ ‘green recycled,’ or ‘eco choice’ may be reviewed along with the claim in certain markets. The prudent approach is to place the figure, calculation basis, and third-party certification mark together and omit modifiers wherever possible. Second, placement and presentation: the location of the percentage on the layout and whether the font size is sufficiently legible should be confirmed before printing, avoiding the risk of producing packaging that is difficult to read or treated as an unimportant footnote. Third, terminology: ‘recycled fiber,’ ‘recyclable material,’ and ‘recycled material’ do not have the same regulatory meaning. The first two primarily describe material characteristics or recyclability, while the latter describes origin. Mixing these terms is among the most frequently cited issues when goods are detained in places such as France. Defining the scope of all four terms on the confirmation form is far less expensive than remedying the problem afterward.

If the transaction certificate chain is broken, does that mean the packaging cannot be used?

Not necessarily. It is important to distinguish ‘cannot be claimed’ from ‘cannot be used.’ Recycled material itself is not subject to use restrictions in most markets; the actual restriction concerns whether a content claim or certification mark may be made. When one link in the chain is missing, there are three common approaches: declare the proportion that can actually be supported, which is lower but defensible; continue tracing upstream, which requires time and may ultimately fail, particularly when the upstream material comes from dispersed recycling sources; or clearly assign responsibility for substantiating that link to the material supplier and state in the order confirmation that the printer does not independently verify the source. We prefer to state expressly in quotations and order confirmations that “the recycled-content claim is based on the accompanying transaction certificate chain and the printer does not independently verify the source.” This is not shirking responsibility; it defines the boundary clearly, because the printer is often further downstream in the chain than the customer assumes while responsibility is nevertheless frequently assigned to the printer.

Need a Custom Packaging Solution?

Learn more about packaging, or consult directly for a custom solution and quote