Eco-Friendly Packaging

Coffee Grounds / Fruit Pomace / Tea Waste: The Real Limits of Three Types of “Waste Biomass” Packaging Materials—Fiber Length / Oil Absorbency / Cost: Which Three Figures Should Printing Plants Ask for First When Inquiring About These Materials?

📅 2026-11-17 ✍️ Wuxi Lexiang Printing & Packaging ⏱ 3min read

💡 💡 At a Glance

Three numbers for waste biomass packaging materials: contact location (which determines whether it can come into direct contact with food), raw material supply stability (the seasonality of fruit pomace is the biggest pitfall), and retail price range (which determines whether the waste can be turned into a financially viable product). At the same time, material parameters must be written into the technical specifications and acceptance must be conducted against those parameters, avoiding a situation where the story comes first and the parameters lag behind.

In April this year, a specialty coffee brand sent us an inquiry. The attachment was a WeChat article titled “Coffee Grounds Turned into Eco-Friendly Packaging: New Possibilities for Zero Waste.” The body featured a photo of a tactile sample that felt like rough paper and left a layer of fine residue on my fingers. The copy was compelling: recycle coffee grounds discarded by stores, dry them, and compress them into package liners and cup sleeves as replacements for EPE foam and paper pulp.

I turned the sample over in my hands and asked three questions:Was the fiber length sufficient to support forming, what was the oil-absorption performance, and was the cost calculated per kilogram or per finished product?The other party’s owner replied: “We haven’t calculated that yet. Let’s make a sample first and see how it works.”

This is not an isolated phenomenon. Over the past two years, terms such as “waste biomass,” “Waste to Worth,” and “zero-waste packaging” have become extremely popular among brands, particularly in the coffee, tea beverage, and baking industries—the three categories that generate the most waste daily and are also the easiest to use in producing “eco-friendly” content. The biggest risk for print shops taking on these orders is:The material story is finished, but the process parameters have not yet been established.The feasibility of mold pressing, load-bearing capacity, oil absorption, print suitability, and mass-production costs—any one of these could cause the story to fall apart.

So today, we’ll break down the three most common waste biomass materials: coffee grounds, fruit pomace, and tea leaves. These three have similar chemical compositions—cellulose, hemicellulose, lignin, and a range of impurities—but what they can be used for in packaging depends on three measurable figures.

Type one material: coffee grounds—large in volume, full of impurities, and short-fibered

The advantages of coffee grounds arestable supply, large volume, and the best brand story to tell.A specialty coffee shop selling 2,000 cups a day can produce more than ten kilograms of wet grounds in a single day, and the costs of centralized collection can be spread out. A brand can film the scene of “coffee grounds discarded by the store returning to the packaging,” and the claim does hold up.

But coffee grounds have three hard constraints.

The first isshort fibers.After coffee beans are ground, their fibers have already been fairly thoroughly broken down, and after extraction, the remaining fibers are short and fragmented. Relying on them alone for molded products results in very low strength, so they usually must be blended in specific proportions with long-fiber pulp or bamboo fiber. Thus, while “forming products from pure coffee grounds” is possible in the laboratory, it is not possible on a mass-production line. Customers often do not distinguish between these two situations.

The second isHigh oil contentCoffee grounds contain oils and extraction residues, and the heat-treatment temperature window during compression molding is very narrow: if the temperature is too high, oils seep out, become sticky, and cause off-flavors; if it is too low, the fibers do not bond well, and the sample falls apart when bent. This is the most common inspection challenge when using coffee grounds for food-contact materials.

The third isColor and odorUntreated coffee grounds are dark brown and have a mottled surface after compression molding. A coffee aroma remains when they come into contact with food—this is an added benefit for coffee brands, but a risk of odor transfer for tea, baked goods, and neutral products.

Therefore, for coffee-ground orders, the first question the printer should ask is:Whether the finished product will directly contact food, or be used as a lining, separator, or outer packaging.The location differs, and so do the available processing routes and the inspection items that can be passed.

Category 2 materials: fruit pomace—long fibers, high sugar content, and strong seasonality

The material story of fruit pomace sounds better than that of coffee grounds, but it is more difficult from an engineering perspective.

Fruit pomace, such as apple pomace and pear pomaceA relatively intact fiber structure, theoretically giving it greater strength than coffee grounds and a more regular surface after molding. The problem isIts sugar and fruit acid contentFresh fruit pomace has a high moisture content and contains soluble sugars, making it prone to sticking and clumping during drying and causing its color to darken. In humid environments, residual sugars also absorb moisture and attract insects.

There is another fatal constraint of fruit pomace that others won’t mention:Raw materials are highly seasonal. The juice-pressing season is concentrated within two or three months. During peak season, raw material prices can be almost giveaway prices, while off-season you can only use inventory or purchase processed powder. A brand negotiates at the beginning of the year to “use locally produced fruit pomace for packaging throughout the year,” only to find that in the fourth quarter its raw material supply has dried up—a very common path to failure.

Therefore, the second number to ask about for fruit pomace orders is:Whether the raw material is supplied during the concentrated juice-pressing season or through channels that provide stable year-round powder supplies. If the client says, “We have an agreement with a juice factory,” you should follow up by asking whether the agreement covers the juice-pressing season or the entire year.

Third type of material: tea waste—it has the best fibers, the highest unit price, and is the most suitable for “high-value” packaging

Tea waste is, among these three materials,The best fiber qualityof. Tea leaves have intact vein structures and a high proportion of long fibers, so compression-molded products can achieve strength, stiffness, and surface smoothness close to that of pulp molding. In addition, tea leaves contain less lipids and polyphenols than coffee grounds, resulting in far fewer odor issues.

The trade-off isunit price. Tea residue is itself a low-value waste material, but producing packaging-grade material requires dust removal, dehydration, fiber grading, sterilization, and drying, making the processing costs far higher than those for coffee grounds. Furthermore, tea itself is not cheap to purchase, and premium tea companies in major cities must also pay disposal fees for tea residue, meaning they are effectively buyingraw material with the double burden of disposal costs.

The third characteristic of tea residue isBest suited to high-value packaging rather than low-value packaging.Likewise, the same kilogram of waste material can support a higher selling price when made into inner trays for compressed tea, liners for tea canisters, or dividers in gift boxes; when made into cushioning for courier boxes, the unit price does not work out.

Therefore, the third number to ask about for tea-residue orders is:What is the retail price range of this packaging?The average customer spending determines whether this pile of waste material can become a product whose economics work, rather than an eco-friendly PowerPoint presentation.

Combining the three numbers: craftsmanship, cost, and testing.

The three materials and three types of issues boil down to what the printing factory actually needs to confirm, as follows.

Regarding craftsmanship: This type of material basically useswet-press molding(the type of process used for pulp molding), rather than being a post-printing process. A printing company’s position in this chain is usually to provide printed surface treatment solutions, apply oil-resistant treatments to surface coatings, or perform post-molding embossing and hot stamping. Therefore, the first question is:Does the molder deliver the blank to me for printing, or do I provide the printing surface solution to the molder?—This determines whether we are dealing with material parameters or finished-product parameters.

Regarding costs: The accounting basis is not the cost per kilogram of material, butthe cost per package.Because the unit price of waste material is so low that it can be ignored, but the cost of the molded mold, energy used for drying, and losses from demolding will not decrease. One cup sleeve uses 30 grams of coffee grounds for molding, so the material cost is almost zero, but the total cost may not necessarily be lower than that of a 1-yuan pulp-molded product. The brand sees the material as “free,” but the printer must factor processing and losses back into the price.

Regarding testing: For parts that come into contact with food, the relevant requirements for food-contact materials should be checked—total migration, specific additives, and odor; for parts that do not contact food but are directly exposed to air or touched by consumers, general requirements apply; structural parts also need to be evaluated for strength and stacking. We have discussed these requirements in detail in other articles.

The final lesson:The biggest risk with orders like this is “leading with the story and letting the parameters lag behind.”The brand’s proposal PPT is usually prepared before the material has even been sampled. If the printer accepts the order based solely on the PPT, it will be difficult to assign responsibility if rework is required. The prudent approach is to list the material parameters—fiber length, moisture content, ash content, post-molding grammage, and whiteness—as technical conditions in the quotation, accept the samples according to those conditions, and make no promises about results beyond them. This one sentence can prevent most subsequent disputes.

Further reading

Several materials-related articles that can be read for comparison:

#Eco-friendly packaging #Bio-based materials #Coffee grounds #Pulp molding #Waste biomass #Sustainable packaging

FAQ

Can coffee grounds really be made into packaging?

Yes, but in most cases, coffee grounds cannot be used alone. Coffee fibers are short and have a high oil content. When molded on their own, they do not offer sufficient strength or heat resistance, so mass production usually requires blending them with high-long-fiber pulp or bamboo fibers. The process is already relatively mature for non-food-contact products such as liners, separators, and cup sleeves; for products that come into direct contact with food, high oil content and odors are the main obstacles, and the processing requirements are much stricter.

Can this packaging biodegrade?

The material itself is bio-based and mostly compostable, but whether the finished product is degradable depends on the entire formulation: if the binder, coating, printing ink, or surface treatment uses anything other than a compostable system, the product as a whole cannot be marketed as compostable. Writing “degradable” on the label without specifying the relevant standards and conditions is not defensible from a compliance standpoint, and the customer will also need a corresponding test report.

The raw material cost of waste is almost zero, so why isn't the resulting packaging cheap?

Because material costs are only part of the total cost. Molds, drying energy consumption, demolding losses, moisture content control, molding yield, and finished-product inspection and sorting are all allocated into the unit cost. The real unit to calculate is the cost of each packaged item, not the cost of waste per kilogram. When customers see the materials as free, the printer must factor processing and losses back into the price; otherwise, the quotation will be distorted.

How can seasonal problems with fruit pomace materials be addressed?

Three options: sign an annual supply agreement with the raw material supplier (including processed pulp, not just fresh bagasse), use fruit pomace from different seasons as formula substitutions while keeping process parameters consistent, and position the product as a premium gift box limited to the juice season without promising year-round production capacity. For the agreement, clarify whether it covers the juice season or the entire year, as this is where problems most often occur.

What exactly do printing plants do with orders like these?

The main tasks are three: providing forming plants with surface treatment solutions for printing (oil-resistant coatings and ink absorption treatment), handling secondary processing such as embossing and hot stamping after forming, and providing surface printing of white blanks when forming plants lack printing capabilities. The role is not to turn waste into packaging, but to solve the printability of formed surfaces—which is often the most difficult part of the entire project.

What is the most important sentence to include in the contract when accepting this type of order?

Write the material parameters as technical specifications and conduct acceptance testing based on those specifications: fiber length, moisture content, ash content, grammage after forming, and whiteness, then add a performance commitment premised on these conditions. This way, disputes over sample performance shift from subjective impressions to parameter comparisons, making it harder for either party to argue. The brand’s most common objection is “We set the parameters,” but without a performance commitment tied to those parameters, disputes are almost inevitable during mass production.

Need a Custom Packaging Solution?

Learn more about packaging, or consult directly for a custom solution and quote