Packaging Certification

Three Practical Boundaries of ISO 22716 GMP Audits for Cosmetic Packaging: Which Three Ledgers Should a Printing Factory Prepare First When Accepting Cosmetic OEM Orders?

📅 2026-11-11 ✍️ Wuxi Lexiang Printing & Packaging ⏱ 3min read

💡 💡 At a Glance

When a cosmetic brand owner audits a packaging printing factory using the ISO 22716 clause checklist, the audit focuses on three evidence boundaries rather than workshop hygiene. First, the scope boundary: ISO 22716 directly applies to cosmetic manufacturing, but its application to printing factories includes the material boundary, such as whether packaging contacts the product; the change boundary, requiring records when ink, adhesive, or paper suppliers change; and the traceability boundary, requiring batch retention samples rather than structural samples. The printing factory should first obtain the client's actual audit clause checklist to avoid ineffective remediation. Second, the responsibility boundary: ISO 22716 proofreading and release requirements mean that identification-related documents must be checked and recorded by an authorized person before production. The most common packaging factory gap is the lack of version records after a customer requests a one-character change, so revised artwork should use identifiable version control. The printing factory is not responsible for judging the validity of filing numbers or ingredient compliance, but all verification must leave traceability records. Third, the evidence boundary: auditors review ledgers, including the material compliance ledger, change control ledger, and batch retention and traceability ledger. Audit results directly affect whether the customer awards annual production volume and shorter payment terms. These 3 ledgers should already exist as internal management tools within every printing factory.

In March 2026, a domestic serum brand scheduled its annual supplier audit for April. The auditor was not from a third-party certification body. The brand's quality department brought in an external auditor whose checklist was based on the ISO 22716 clauses.

The printing factory owner called the client and asked: “We make folding cartons, not cosmetics. How can we be audited against cosmetic GMP?”

The response was direct: “We are not auditing the cosmetics. We are auditing whether this box could cause problems with our product.”

After this exchange, the audit became a specific exercise. What the printing factory should prepare, how thoroughly it should prepare, and who is responsible when problems occur represent three entirely different boundaries. Once these boundaries are understood, the audit is simply a process. If they are not, the audit becomes a dispute governed by whoever speaks loudest.

The First Boundary: Audit Scope — Which ISO 22716 Clauses Actually Apply to the Printing Factory

ISO 22716 is the Good Manufacturing Practice standard for cosmetic production. It applies to the manufacturing process of cosmetics themselves: facility conditions, personnel hygiene, equipment cleaning, batch records, change control, and complaint handling. Folding cartons and outer boxes produced by a printing factory fall outside its direct scope of application.

However, when a brand owner uses its clause checklist to audit packaging suppliers, some clauses cross the boundary and apply to the printing factory, often in an unexpected way. The focus is not “Does your workshop comply?” but “Do you have evidence for this process step?”

The auditor asked the printing factory three questions that day:

  1. “Have migration tests been conducted on the four-color inks used for this batch of boxes?”
  2. “You changed ink suppliers last month. Where are your change records?”
  3. “A customer complained about the labels on a batch of boxes. Do you still have the batch retention samples?”

None of these questions concerned the workshop. The first concerned the material boundary: does the packaging contact the product? Indirect contact must also be assessed because serum may contact the inner lining of the outer box, while the bottle label is in direct contact with the bottle.

The second concerned the change boundary. One of the most important elements of ISO 22716 is change control: changing an ink, adhesive, or paper supplier means that production conditions have changed, and the packaging must be reassessed. If the printing factory changes an ink supplier without retaining a record, the auditor sees this as “you did not know that you had changed something.”

The third concerned the traceability boundary. Retention samples are not for display; they are for investigation when an incident occurs. A “size sample” is normally just an empty carton kept in the sample room to demonstrate the structure. It is not a retention sample. Auditors require batch retention samples showing which roll of paper, which batch of ink, which machine, and which production team were used.

Therefore, the first question the printing factory should ask the client is not “Which standard is the audit based on?” but: “Can you provide the clause checklist for this audit in advance? I will prepare evidence according to the items you will actually inspect.”

This can prevent substantial wasted effort. Some printing factories hear “GMP” and immediately repaint walls, purchase hand sanitizer, and install anti-static mats. The auditor may not inspect any of them, while the report still lists the same genuine problems.

The Second Boundary: Responsibility — Is a Printing Error the Printing Factory's Fault or the Brand Owner's?

The statement most likely to trigger a dispute during an audit is: “You printed the filing number incorrectly.”

The printing factory usually responds with: “We printed exactly according to the approved artwork provided by your company.”

This response often fails during an audit because the auditor follows up with: “What are your records for the artwork approval process?”

If the printing factory only has a “customer-signed artwork” and no records of the approval process, it is at a disadvantage in the discussion. ISO 22716-type management systems include the concept of “proofreading and release”: every document related to product identification must be checked by an explicitly authorized person before production and supported by a record. This is standard practice in cosmetic factories, but it is often absent in packaging factories.

In practice, the approval process in a packaging factory often works like this: the customer sends a PDF by email, the printing factory replies “received,” and production is scheduled. If the customer says “change one character,” the factory makes the change, sends a photograph of the finished product, and the customer says “approved.”

This sequence contains a critical gap: for the revised version, who made the change, when was it made, and which character was changed? Without version records, an incident becomes a standoff between “you printed it incorrectly” and “I gave it to you exactly like that,” with the louder party treated as the one in the right.

One printing factory uses a simple but effective method: the approved artwork must be returned as a versioned PDF, with the file name stating “Approved Version-V3-Date,” and every change marked in a different colour. The printing factory then records that file name in its layout records. This takes almost no additional effort, yet its value during a dispute exceeds that of ten management system documents.

The other half of the responsibility boundary concerns matters the printing factory must not decide on the customer's behalf: whether a filing number is valid, whether an ingredient list complies with requirements, and whether warning statements are positioned correctly are the legal and quality responsibilities of the customer. The printing factory is responsible only for faithfully reproducing content provided and approved by the customer. The greater the extent to which the printing factory exceeds its remit to make judgments for the customer, the greater the risk. However, “It is not my responsibility” is not a reason to verify nothing. Verification creates traceability; it does not transfer liability.

One brand owner's quality control manager stated this plainly: “We are not afraid of you saying this is not your responsibility. What worries us is that, after an incident, you say, ‘We did not know.’ Knowing and not knowing make all the difference in a recall file.”

The Third Boundary: Evidence — The Three Ledgers the Auditor Will Request

The first two boundaries are conceptual, but the third determines the audit outcome: where the evidence is.

Auditors generally do not count equipment in the workshop. They review documents. What they request depends on the purpose of the audit: assigning a compliance rating to the supplier or investigating a specific complaint.

The three ledgers that a printing factory should be best prepared to present are listed below.

LedgerWhat It RecordsConsequence of Missing It
Material Compliance LedgerFor every batch of ink, adhesive, and paper: supplier, model, batch, and the corresponding migration test/heavy metal report and validity periodWhen the auditor asks, “Where is the report for this batch of ink?”, the printing factory spends 10 minutes searching through filing cabinets
Change Control LedgerDates, reasons, assessment conclusions, and approvals for changes to materials, processes, equipment, and customer-designated suppliersDetermined to be an “uncontrolled change,” directly escalating to a major nonconformity
Batch Retention and Traceability LedgerBatch number → paper batch number → ink batch number → machine → production team → finished quantity → retention sample storage locationThe customer cannot identify the relevant batch during a complaint, and all investigation costs fall on the customer

The third ledger, the Batch Retention and Traceability Ledger, is also the most frequently overlooked. Many printing factories only keep structural samples in their sample rooms: empty cartons displayed on shelves to demonstrate the structure. These are not retention samples. A retention sample must answer three questions: Which batch of paper was used? Does that paper have a corresponding compliance report? Where are the finished products from this production run now?

A premium-line printing factory was audited in 2025 after a customer complained that the ingredient table on a batch of outer boxes was printed incorrectly. The customer's first request was for the “retention sample + ink batch report + finished quantity for that batch.” The printing factory provided all three within a week. The batch was traced to the third machine operated during the week, the second shift, and the batch number of a specific paper roll. The customer's internal investigation was completed in 3 days. The incident became a turning point that helped the printing factory secure a larger share of the customer's annual orders—not because it performed exceptionally well, but because it investigated quickly.

Conversely, if the printing factory cannot provide retention samples, the customer must investigate the entire batch and bears the cost. The customer will remember the incident, although it may not remember who caused the delay next time.

Which Three Ledgers Should a Printing Factory Prepare First When Accepting Cosmetic OEM Orders?

After organizing these three ledgers, there is one additional task worth completing: create a one-page index listing each ledger's document number, responsible person, storage location, and date of the latest update. An auditor's first question is often, “Show me your change control records.” The time spent looking for the ledgers can damage the auditor's impression of the printing factory more than the review itself.

A final reminder: the audit is not an end in itself; it is the customer ranking the risk level of the supply chain. A printing factory with a strong audit result receives not praise from the customer, but greater order volume in the following year and shorter payment terms. A factory with a poor result is placed on a “continued observation” list.

The most cost-effective approach is therefore not to treat the audit casually, but to use the audit checklist as a customer requirements document. The three ledgers requested by the customer are also the three that the printing factory should already maintain internally. Implementing them is straightforward; failing to do so means that the next audit will raise the same three questions.

Further Reading

#Cosmetic Packaging #ISO 22716 #Supplier Audit #Packaging Compliance #Batch Retention Samples #Change Control

FAQ

Does a printing factory that only produces folding cartons need ISO 22716 certification?

Usually not, and it cannot obtain it. ISO 22716 applies to cosmetic manufacturing companies themselves. Its certification scope covers formulation, filling, facility cleanliness, and batch record systems, so folding carton printing factories are outside its scope. When a brand owner uses the ISO 22716 clause checklist to audit a packaging supplier, it is borrowing this framework for its own supplier audit rather than requiring the printing factory to hold the certificate. Instead of applying for the certificate, the printing factory should first obtain the client's actual clause checklist for the audit and prepare evidence for the items that will genuinely be inspected.

Is it overstepping for a brand owner to audit a printing factory against cosmetic GMP?

In terms of the standard's direct scope of application, it does not apply directly. However, this is common and reasonable in the industry. Packaging is part of a cosmetic product, and inks, adhesives, and label information can directly affect product quality and safety. Brand owners have the right to extend their audits accordingly. The issue is not whether an audit is permitted, but whether its scope is clearly defined: whether it covers packaging-related elements or requires the printing factory to meet the complete facility standards of a cosmetic factory. The printing factory should confirm the scope in writing before the audit to avoid unnecessary full-workshop remediation.

What should a printing factory do if the auditor requests an ink migration test report that it cannot provide?

There are 2 situations. First, the ink supplier already has the report, but the printing factory did not archive it. In this case, immediately request it from the supplier and add it to the material compliance ledger. Also document the production date and batch of the relevant goods, and proactively propose finished-product verification or migration testing as supplementary evidence. Second, the supplier has never conducted migration testing. Do not attempt to explain this by saying, “We have always used it.” Disclose the situation honestly and propose a remedial path: either switch to an ink with an existing report or submit samples for testing, confirming in advance with the customer who will bear the testing costs and delivery impact. Concealment is more serious than a missing report. A missing report indicates incomplete evidence, while verified concealment raises an integrity issue.

How should a printing factory document customer artwork changes so that it is not left in a weak position?

The key is to create an identifiable version for every change and record the version number in the layout records. In practice, return the customer's approved artwork as a versioned PDF, with the version number and date included in the file name and all changes marked in colour. On the production order, record only the version number and file name, rather than vague wording such as “latest version.” Before production, an authorized person should proofread that version, sign it, and retain the record. If a dispute occurs, the printing factory can prove which version was printed and who approved it while preserving the fact that the customer retained final responsibility for the content.

How long should batch retention samples be kept, and what should they include?

Retention periods are usually linked to the product's shelf life and the client's management system requirements. Retaining samples for 2 to 3 years is common in the daily chemical and cosmetics industries, with the client's audit requirements taking precedence. Retention samples must answer 3 questions: Which batches of paper and ink were used? Where are the compliance reports for those materials? How many finished items were actually produced in this batch? A structural sample—such as an empty carton used to demonstrate the structure—does not qualify as a retention sample. Display boxes in the sample room cannot replace finished-product retention samples sealed and stored by batch. Retention samples should be bagged, labelled, and stored separately by batch number to avoid confusion with display samples.

If a printing factory prepares all 3 ledgers, is the audit guaranteed to pass?

No guarantee, but the likelihood of major nonconformities can be significantly reduced. The outcome also depends on the weighting of the client's checklist, the brand owner's priorities for that year, and the auditor's previous impressions of the printing factory. The value of the ledgers lies in eliminating indefensible issues such as “you did not know that you had changed something,” allowing the rest of the audit to return to technical discussions—for example, whether the printing registration accuracy meets the label dimensional tolerances. Technical discussions are areas where a printing factory can succeed, while discussions of integrity are areas where it cannot afford to fail.

Need a Custom Packaging Solution?

Learn more about packaging, or consult directly for a custom solution and quote