Packaging Procurement Guide

Customer-Supplied Materials vs. Purchasing Agent Services: 3 Practical Boundaries—Ownership / Who Bears Waste / Who Bears Compliance Responsibility—Which 3 Clauses Should a Printer Sign First for “We’ll Supply the Paper; You Just Print” Inquiries

📅 2026-11-09 ✍️ Wuxi Lexiang Printing & Packaging ⏱ 3min read

💡 💡 At a Glance

Customer-supplied materials involve the customer delivering the materials, making waste the customer’s cost. Purchasing agent services involve the customer paying the printer to procure the materials, leaving price-increase and material-procurement risks with the printer. Using the same quotation for both models is the most common source of disputes. Every order must define 3 matters: material ownership and waste measurement standards (predictable make-ready and trial-run waste, actual sample waste, and separately listed offcuts), inspection standards (grammage / stiffness / whiteness + objection period + retained evidence), and compliance responsibility (ink, glue, and film lamination belong to the printer; paper belongs to the customer, with corrective-action and return responsibility specified for noncompliance).

“We’ll buy the paper ourselves and deliver it to you. You just print it.”

This statement appears far more often in the packaging printing industry than most people realize. Customers do this for several reasons: to designate a paper mill out of concern that the printer might manipulate the materials or use lower-grade stock; to specify materials under unified brand standards; or simply to reduce costs, since buying paper directly may provide a lower material price and create the impression that the printer is earning too much.

“You buy the paper for us, and we’ll pay for it” describes a different type of order. The customer either lacks procurement capability or does not want to manage procurement, but wants the printer to take responsibility for material quality and shift the corresponding liability along with it.

These two models may look similar on a quotation, but they are entirely different in actual execution. The cost of confusing them usually becomes apparent only after production is completed and settlement begins.

The First Boundary: Ownership—Who Owns the Material Once It Arrives?

This is where problems most frequently occur with customer-supplied materials.

Under the customer-supplied model, ownership of the paper belongs to the customer. What the printer receives is custodial property, not its own raw material. This distinction becomes financially important at three points:

First, waste.Plates for make-ready, white-box samples, and trial-run ink are inevitably consumed during production. The material belongs to the customer, so the waste belongs to the customer as well. On what basis may the printer deduct it, and how much may it deduct?

Materials supplied by a customer-designated paper mill have specific inspection boundaries that must be negotiated: grammage, stiffness, and whiteness. If the printer finds that the grammage does not conform during incoming inspection, should it reject the material or accept it anyway? If it accepts the material, who owns the finished products printed from it?

A common practice is to include a separate line item for “incoming material waste” on the quotation. However, the wording of this item determines whether disputes will arise later: if it states “calculated at 3%,” does that mean 3% by weight or 3% by value? What base is used for the calculation? Are make-ready paper and white-box samples calculated separately or together?

Second, revisions.After the customer revises the artwork three times, the wasted plate paper is customer-supplied material, while the printer has borne three trial prints. Revisions themselves carry a design fee. This is a clear pricing path when a gift-box manufacturer handles physical samples involving more than 3 artwork revisions. However, design fees do not cover wasted materials.

Third, clearance and remaining stock.After an order is completed, who owns the material left in storage? This is the issue most likely to surface only in the second year under the customer-supplied model. After a customer revises the artwork, can the remaining special paper be used on another order? If it cannot, it will remain in the printer’s corner indefinitely.

The logic of the purchasing agent model is the opposite: the printer procures the material, and the customer pays for it. Commercially, ownership and waste can be agreed as either “procured and held by the printer on the customer’s behalf” or “ownership transfers upon delivery.” However, purchasing agent services mean that the printer assumes procurement risk. If paper costs 5200 per ton when the customer places the order and rises to 5800 after the printer has held materials for 3 months, while the customer recognizes only the price at the time of ordering, who absorbs the 1000 difference?

Quotations for purchasing agent orders must lock down 3 matters: the quotation validity period (normally 7 to 15 days, with price adjustments applying thereafter), the material procurement timing (materials are procured within X days after the customer approves the final artwork, with subsequent price increases charged at the new price), and retroactive handling of quantity reductions (if the customer reduces the order from 100,000 to 50,000 during production, what happens to the materials already procured?).

The Second Boundary: Waste Measurement Standards—3 Types of Waste, Each Calculated Differently

“Waste” in packaging production has never been a single figure. It falls into at least 3 categories, each with different calculation methods and responsibility allocations.

Waste TypeWhat It IncludesWho Bears It
Make-ready wasteTrial printing during plate setup, color matching, and the sheets printed before the production runCustomer-supplied=customer material waste; purchasing agent=printer’s procurement cost
Sample wasteWhite samples, structural handboards, and color samplesThe sample fee normally covers part of it; any excess is negotiated separately
Trial-run wasteWasted sheets, plates, and test inks during machine adjustmentCustomer-supplied=customer material; purchasing agent=printer’s cost

Of these, make-ready and trial-run waste is relatively predictable because it depends on the number of presses, plates, and color-matching attempts. Sample quantities depend on the number of customer revisions and are therefore unpredictable.

Accordingly, the quotation for a customer-supplied order should not merely state a general “waste rate.” It should use a two-part formulation such as “make-ready and trial-run waste calculated at X; sample waste settled on the actual quantity.”

There is also a more detailed measurement issue: whether waste is calculated by weight or by sheet count.

Paper is priced by area, so waste is naturally calculated by area as well: sheet count × area × grammage. However, the customer is likely to think in terms of “How many kilograms of paper did I give you, and how many kilograms of finished products did you return?” The difference between these two calculations consists of the paper’s cutting and trimming waste. After printing, the paper must be trimmed to size, and die cutting also removes waste. If 12 boxes are printed on an 889×1194 four-sheet, the offcuts from trimming and die cutting add weight, but the number of boxes does not increase.

Handling die-cutting offcuts involves a specialized decision: returning them to the paper mill for recycling, selling them as scrap, or composting them—and which party pays. If the printer and customer agree that “offcuts belong to the printer,” this represents genuine revenue. Without an agreement, the offcuts become a cost.

As a numerical calibration: the 5% of weight most likely to be overlooked in die-cutting offcuts is precisely the portion whose value is most easily underestimated. The tighter the die layout, the less offcut material is generated; the looser the layout, the more paper is wasted. This is what the “layout waste rate” on a quotation refers to.

The Third Boundary: Compliance Responsibility—Whose Ink and Whose Report?

This is the most overlooked and most expensive boundary under customer-supplied materials.

Food-contact materials follow a clear responsibility allocation principle: whoever places the material into the final product bears the corresponding compliance responsibility.

Under the customer-supplied model, the customer supplies the paper and the printer performs the printing. Therefore:

  • GB 4806.14-2023 inks for food contact use—The printer supplies the ink and must be able to provide compliance information. When a printer receives a customer request to review the MSDS, it must be able to produce it. This responsibility chain lies with the printer.
  • GB 4806.15 adhesives for food contact use—For orders involving adhesive lamination, the party supplying the adhesive must provide the corresponding report.
  • Compliance of the paper itself—Migration limits, fluorescent brighteners, coatings, and other requirements for food-grade paper fall under the paper supplier’s reporting responsibility.
  • GB 4806.13 composite materials for food contact use—The standard governs either the “composite as a whole” or “each material layer.” These two approaches produce entirely different responsibility allocations.

The danger under the customer-supplied model is that because the customer-provided paper has a compliance report, the printer assumes that the risk for the entire order has been eliminated. However, the printer’s ink, glue, or film lamination may cause the finished packaging to fail migration or solvent-residue requirements.

In practice, whether a printer can provide a compliance traceability chain when a customer requests an MSDS and the 4 real cases of excessive migration in food packaging printing—with sources in ink, glue, film lamination, and coating—are different aspects of the same issue: there are 4 sources of excessive migration, and 3 of them are controlled by the printer.

The purchasing agent model presents another pitfall: when the printer procures the materials, the customer generally assumes that “you bought the materials, so compliance is your responsibility.” This assumption may be commercially valid, but it is not necessarily valid under legal and regulatory requirements—especially when the end user is a consumer and the printer is identified as the material supplier in the documentation.

Therefore, whether under the customer-supplied model or the purchasing agent model, the contract should include a clear statement covering: the intended food-contact application of the finished packaging, the applicable standard, the party responsible for producing the report, the party bearing testing costs, and the party responsible for corrective action and returns if the materials fail to comply.

The 3 Clauses That Must Be Included Before Accepting an Order

Required ClauseCustomer-Supplied ModelPurchasing Agent Model
1. Material Ownership and WasteThe material belongs to the customer; make-ready and trial-run waste is calculated at X% for settlement, sample waste is settled on the actual quantity, and the handling of remaining stock is specified (held at the factory / returned / credited)Material procurement timing, quotation validity, price-adjustment rules, and the handling of materials already procured when the order quantity is reduced
2. Inspection StandardsThe 3 incoming inspection fields (grammage / stiffness / whiteness), the objection period, and the rejection or acceptance-with-concessions rules for nonconforming materialsInspection standards for materials procured by the printer and whether the customer retains the right to review them
3. Compliance ResponsibilityThe printer provides compliance reports for ink, glue, and film lamination, while the customer provides the paper’s compliance report; the contract specifies who must take corrective action and bear the cost of returns if the materials fail to complyMaterial compliance responsibility transfers with procurement, but the parties must agree on testing-support obligations and the corrective-action process for nonconforming materials

Beyond these 3 clauses, there are 2 practical reminders.

First, retain evidence when inspecting customer-supplied materials. On the day the paper arrives at the factory, weigh it, measure its dimensions, and test the grammage of 3 sheets. Record these results on the incoming inspection note and retain photographs as evidence. If the customer later claims that the printer used or wasted their material, the parties can rely only on the incoming inspection records. This step takes 10 minutes, while resolving a dispute may take 3 days.

Second, do not use the printer’s regular suppliers for purchasing agent orders without notifying the customer. Having paid for the purchasing agent service, the customer’s main concern is whether the materials you purchased are the same as those it would have purchased directly. The printer should either procure from the customer-designated paper mill or clearly disclose the paper mill used and provide verifiable information. This ensures that the traceability chain remains clear if a problem occurs with the finished product.

Further Reading

#Customer-Supplied Materials #Purchasing Agent Services #Incoming Material Waste #Material Ownership #Compliance Responsibility #Printing Contract

FAQ

What is the biggest difference in quotations between customer-supplied materials and purchasing agent services?

The allocation of waste. Under the customer-supplied model, the paper belongs to the customer, so waste from make-ready paper, white-box samples, and trial-run ink is the customer’s cost. Under the purchasing agent model, the printer procures the materials, so waste is reflected in the printer’s costs, although it can be transferred to the customer by locking down the quotation validity period and material procurement timing. Using the same quotation for both models is the most common source of disputes.

Should the waste rate for a customer-supplied order be calculated by weight or by sheet count?

These should be stated separately. Make-ready and trial-run waste is relatively predictable when calculated by area (sheet count × area × grammage). Sample waste depends on the number of customer revisions and is unpredictable, so it should be stated as “settled on the actual quantity.” The weights of trimming and die-cutting offcuts should also be listed separately—the difference between the paper entering the factory and the finished boxes is layout waste.

What should be done if the grammage of material delivered by a customer-designated paper mill is incorrect?

It must be addressed during incoming inspection and cannot be postponed until production is complete. The 3 incoming inspection fields are grammage, stiffness, and whiteness, and the objection period must be stated in the contract. If the material is accepted despite nonconformity, responsibility for the finished products and the customer’s right to seek recourse depend entirely on whether the sampling inspection records from that time were included on the incoming inspection note.

Should purchasing agent orders include a quotation validity period?

Yes. It is normally 7 to 15 days. The material procurement timing (within X days after the customer approves the final artwork) and price-adjustment rules must also be stated. Otherwise, if paper costs 5200 per ton at the time of ordering and rises to 5800 after materials have been held for 3 months, the printer must absorb the 600 difference.

Who provides food-contact material compliance reports under the customer-supplied model?

Responsibility is allocated by production stage. The customer or paper supplier provides the paper’s compliance report, while the printer provides reports for ink, adhesives, and film lamination. GB 4806.14 governs ink and GB 4806.15 governs adhesives. Of the 4 sources of excessive migration, ink, glue, film lamination, and coating, 3 are controlled by the printer. The contract must specify who must take corrective action and who bears the cost of returns if the materials fail to comply.

A customer places an order for 100,000 units and later changes it to 50,000. What happens to the materials already procured?

The contract must specify this in advance. This is one of the most significant risks in purchasing agent orders. Materials already procured may be settled at the original quantity, purchased by the customer at cost, or returned to the paper mill. The same issue may arise in different forms in printing orders involving order splitting, presales, and phased shipments.

Can leftover customer-supplied materials be used on other orders?

Generally, no, unless the contract provides otherwise. Customer-specific paper—especially paper with anti-counterfeiting features, special colors, or unusual grammage—is difficult to redirect once it becomes idle and will continue to occupy storage space at the printer. If this is not addressed, the issue may only become apparent during the following year’s inventory review.

When a printer procures materials under a purchasing agent arrangement, does all compliance responsibility automatically transfer to the printer?

This is normally the commercial agreement, but it is not necessarily valid under regulatory and legal requirements, particularly when the packaging is intended for food contact and the printer is identified as the material supplier in the documentation. The prudent approach is to state the printer’s testing-support obligations and the customer’s material-designation rights separately in the contract.

Need a Custom Packaging Solution?

Learn more about packaging, or consult directly for a custom solution and quote