Biodegradable Flexible Packaging: 3 Real Boundaries of Barrier Performance vs Biodegradability — PLA/PBAT Oxygen Permeation Limitations, Aluminium Coating Conflicts, and Composting Prerequisites
💡 💡 At a Glance
Biodegradable flexible packaging has 3 real boundaries. First, material boundaries: PLA offers good strength and printability but is brittle, heat-sensitive, and weak against oxygen and water vapour. PBAT provides flexibility and impact resistance but has a low heat-resistance limit. A PLA/PBAT blend can balance these properties, but changes in the blend ratio also change barrier performance. Improving barrier performance requires additional layers, and a single non-biodegradable layer can invalidate the entire package’s claim; an EVOH barrier layer will almost inevitably undermine biodegradability. Second, processing boundaries: aluminium and copper coatings improve barrier performance, but metal layers remove the entire package from the compostable category. Compostable coated barrier solutions are more expensive and require supplier certification. Third, composting prerequisites: industrial composting requires a constant 58℃, suitable moisture, and active microbial conditions, while domestic composting cannot reach these temperatures. An EN 13432 industrial composting label does not mean a package will degrade at home. The first 3 numbers a printer should establish are shelf life, product characteristics—including oil, moisture, and oxygen sensitivity—and the intended composting or waste-management route. Until these are defined, any material combination is speculative.
In March 2026, a nut brand approached a printer seeking to develop a “fully biodegradable” stand-up pouch.
The customer’s requirements sounded reasonable: use biodegradable materials, avoid plastic lamination and aluminium coating, and ensure the package could biodegrade.
The printer took these requirements to its suppliers, who asked a simple question: “What will this pouch contain, and what is its shelf life?”
The customer answered: macadamia nuts, with a shelf life of nine months.
The supplier responded: “Then it cannot be made from pure PLA.”
This is the central subject of this article. The technical challenge in biodegradable flexible packaging has never been whether the material can biodegrade—that question already has a mature answer. The difficulty is that barrier performance, shelf life, and biodegradability often work against one another in the same pouch, yet most projects select materials while the requirements are still vague.
The First Boundary: Materials — The Limitations of PLA and PBAT Directly Affect Shelf Life
Only a few main materials are used in biodegradable flexible packaging, and each has clearly defined limitations.
PLA is brittle and heat-sensitive. It offers good mechanical strength, high transparency, and strong printability, making it the material that feels most like traditional PET. However, its glass transition temperature is around 60℃, which creates 2 issues: a narrow heat-sealing window (higher temperatures cause sticking, while lower temperatures produce weak seals) and deformation and embrittlement when holding hot food or being stored in a high-temperature vehicle. Brittleness also has a less obvious consequence: after filling and stacking the pouches in storage for several months, stress marks or even cracks can appear in compressed areas.
PBAT has limited heat resistance and poor gas-barrier performance. It offers the best flexibility and impact resistance among biodegradable polyesters, and blending it with PLA can substantially improve toughness. However, PBAT has a low upper heat-resistance limit, with its heat-sealing temperature window typically around 110℃, significantly below traditional PE/PET. It also provides virtually no barrier against oxygen or water vapour.
The industry’s conventional solution is a PLA/PBAT blend: PLA provides strength and barrier performance, while PBAT provides toughness. However, purchasers must understand one reality: any change in the blend ratio changes performance. When PBAT is increased to above 20% to improve toughness, the pouch’s barrier performance declines noticeably because the PBAT phase becomes continuous, allowing oxygen and water vapour to preferentially permeate through it.
The customer’s instruction to “use PLA” must therefore be translated by the printer into 3 questions: What percentage is PLA, which determines oxygen permeability? What percentage is PBAT, which determines toughness? Does the multilayer structure contain other layers, which determine whether the entire package can biodegrade?
Another issue cannot be overlooked: the real shelf-life bottleneck in biodegradable flexible packaging is often the seal or top seal rather than the film. Even if a film has an extremely low oxygen transmission rate, gas can still enter through the seal if its strength is inadequate or if microscopic channels exist in the sealing area. Many customers eventually discover that “leaking” has been misdiagnosed as “the film does not work.”
The Second Boundary: Processing — Added Barrier Layers Often Invalidate Biodegradability Claims
Products such as nuts, biscuits, and coffee are sensitive to oxygen and water vapour. Pure PLA/PBAT cannot provide sufficient protection, so a barrier layer is normally added. This creates the central conflict addressed in this section.
An EVOH barrier layer will almost inevitably invalidate the biodegradability claim. EVOH is one of the best materials for high-barrier performance, but mainstream EVOH is currently neither biodegradable nor compostable. A four-layer PLA/PBAT/EVOH/PLA structure delivers excellent barrier performance, but the EVOH layer is treated as an impurity in composting systems, affecting both actual recycling and composting. The moment EVOH is incorporated, the package is no longer “biodegradable packaging” under a strict definition.
What if the customer requires barrier performance? The industry offers 3 practical approaches:
- Reduce and optimise the barrier-layer thickness. Using less EVOH may keep the overall structure within the certification range for compostability, but this “may” must be confirmed in writing by the supplier; the printer cannot make the determination independently.
- Use a compostable coated barrier solution, such as a coating on a PLA substrate that meets composting requirements. This route costs more and depends heavily on the supplier’s supporting documentation.
- Change the packaging logic for the contents. For example, use smaller packs, shorten the shelf life, or accept a shorter shelf life in exchange for a simpler structure.
The second processing conflict is aluminium coating. A metallised aluminium coating can increase barrier performance by an order of magnitude and is the standard response to high-barrier requirements, but it creates a fundamental contradiction: the aluminium layer prevents the entire package from being composted or entering the paper-based recycling stream. In the context of C2C and EPR, aluminium coating is a clear disadvantage.
At the proposal stage, the printer must ask the customer one highly specific question: “Which waste-management system will ultimately process this pouch—industrial composting, domestic composting, or residual waste?” The answer determines which material combinations are technically viable. If the customer cannot answer it, the project has not yet been structurally defined.
The third processing consideration is printability. PLA/PBAT materials have low surface energy, weaker ink adhesion than traditional PE/PET, and greater sensitivity to ink selection. Common solutions include primers or corona treatment. Both increase cost, and the supplier must also determine whether the material remains compostable after primer application or corona treatment. A primer added merely to ensure print adhesion may be sufficient to remove the entire package from a compostability claim.
The Third Boundary: Composting Prerequisites — “Biodegradable” Has a Threshold That the Printer Does Not Set
This section requires the clearest explanation to customers because it directly determines whether a brand can print a specific label on its packaging.
Industrial composting and domestic composting are entirely different processes. Industrial composting requires a microorganism environment maintained at approximately 58℃, with suitable moisture and continuous turning. Under these conditions, PLA/PBAT materials typically decompose within several weeks to several months. Domestic composting piles never reach comparable temperatures, and many materials degrade so slowly that visible changes may not occur for years.
Consequently, when a customer says, “We want consumers to throw it into their household waste bin and have it biodegrade,” the statement is technically almost meaningless. EN 13432 covers industrial composting, and ASTM D6400 also focuses primarily on industrial composting. Domestic composting uses a separate test method, and some systems separately identify it with a HOME label. The 2 labelling systems cannot be used interchangeably.
Another practical issue must be raised with customers: printing a label on the package does not mean the package will actually enter a composting facility. Landfill and incineration remain the primary methods of urban municipal solid-waste treatment in China, while industrial composting facilities have very limited coverage. A nut pouch with a compostable label may ultimately be sent to an incinerator, resulting in virtually no practical contribution to waste reduction. If a brand genuinely cares about this outcome, reducing material usage and reducing the number of layers are more effective than printing a label.
Material reduction also provides scope for structural design by the printer. Can a stand-up pouch eliminate one composite layer, use a thinner gauge while maintaining the same shelf life, or achieve the same stiffness with less material? These questions can be discussed by the printer and the customer.
In 2025, a premium nut brand reduced its stand-up pouch from a 4-layer composite to 3 layers, cutting the pouch weight by 8% and reducing costs. It also shortened the shelf life from nine months to seven months, improving channel inventory turnover. Its public explanation was: “We do not want to print a label that consumers neither understand nor can act on. We want the pouch itself to use less material.”
The 3 Numbers a Printer Should Ask First When Accepting a Biodegradable Flexible Packaging Order
| Number to establish | What to ask the customer | Why it determines the material solution |
|---|---|---|
| Shelf life | How long does the product actually take from filling to being sold through, rather than the theoretical shelf life? | Shelf life converts directly into requirements for oxygen and water-vapour transmission rates, which in turn determine whether barrier layers are needed and how many layers are required. |
| Product sensitivity | Is the oil content high, does the product contain moisture, and does it need protection from oxygen or light? | Oil accelerates PLA hydrolysis; for highly oxygen-sensitive products such as coffee and nuts, barrier requirements may exceed the comfortable performance range of biodegradable materials. |
| Final destination | Industrial composting, domestic composting, residual waste, or a requirement to enter the paper-based recycling stream? | This determines whether structures containing aluminium coating, EVOH, or non-biodegradable primers can be used, as well as which label may be printed on the package. |
Before these 3 numbers are established, every material combination is merely a guess. Once they are defined, the printer should obtain written documentation from the material supplier: evidence of compostability or biodegradability, an explanation of whether the barrier layer changes the overall properties, and confirmation of whether primers or corona treatment required for printability affect the compostability conclusion. These 3 documents provide the basis for the brand’s future packaging claims and protect the printer as well.
One final practical reminder: the printing window for biodegradable flexible packaging is narrower than for traditional materials. The upper heat-sealing temperature is lower, drying temperatures must remain controlled because PLA hydrolyses more rapidly at high temperatures, and ink adhesion is more sensitive to primer selection. These parameters should be validated together during the sample stage rather than discovered during final mass-production adjustments.
Further Reading
- 4 Certification Standards for Biodegradable Packaging—ASTM D6400 / EN 13432 / GB/T 19277 / HJ/T 209
- EN 13432 vs ASTM D6400: Industrial Composting vs Domestic Composting—The real differences across 3 types of standards
- How 3 Types of Accessories Defeat the Recyclability of Paper Packaging—Adding a handle can turn an entire carton from paper into mixed materials
- 3 Practical Barriers to Mono-Material Packaging—Barrier layers / adhesives / inks
- Is Plastic Packaging Environmentally Friendly?—How to distinguish authentic from misleading claims across 3 types of degradation data
FAQ
Can PLA flexible packaging be used for nuts?
Yes, but it requires structural design and barrier layers. Consider 2 factors: first, shelf life, because PLA has inadequate oxygen and water-vapour barrier performance on its own. Longer shelf lives require barrier layers, and a higher PLA/PLA blend ratio improves barrier performance while reducing toughness. Second, the heat-sealing window, because the glass transition temperature of PLA is around 60℃. Excessive sealing temperatures cause sticking, while insufficient temperatures produce weak seals, making this window considerably narrower than that of traditional PE. Biodegradable flexible packaging for nuts therefore commonly uses a PLA/PBAT blend with a thin barrier layer. The exact ratio should be validated by the supplier according to your shelf life and contents rather than estimated by the printer from experience.
If an EVOH barrier layer is added, does the pouch still qualify as biodegradable?
Strictly speaking, no. EVOH is a high-barrier material, but mainstream EVOH is not biodegradable. Once incorporated into a PLA/PBAT multilayer structure, the entire package may be treated as containing impurities under strict composting standards. This is the most common breakpoint in flexible packaging: the barrier layer added to improve protection invalidates the biodegradability claim. There are 3 viable approaches: reduce the EVOH amount and obtain a written conclusion from the supplier, switch to a compostable coated barrier solution, or adjust the shelf life and pouch format to reduce barrier requirements. The appropriate approach depends on the contents and target recycling system and should be determined during the design stage, not debated immediately before mass production.
Can metallised film be used in biodegradable packaging?
Technically, yes, but it removes the entire package from 2 waste-management streams simultaneously: it can neither be composted nor enter the paper recycling stream. The metal layer is a contaminant during composting and can contaminate an entire batch of pulp during paper recycling. Aluminium coating and biodegradability claims are therefore logically incompatible. If a customer requires both high barrier performance and compostability, a trade-off between these requirements is unavoidable.
Does printing a compostable label guarantee that the package will be sent for composting?
No. These are often confused. A label indicates that the material can break down under suitable composting conditions; it does not mean consumers can discard the package and ensure it will be composted. In practice, most municipal solid waste is landfilled or incinerated, and industrial composting facilities have limited coverage. A nut pouch carrying a compostable label may ultimately be incinerated, making its actual contribution to waste reduction negligible. Compared with printing a label that consumers may not understand, reducing material usage and the number of laminate layers delivers substantially greater environmental benefits.
What special considerations apply to printing on biodegradable film?
There are 3 common failure points. First, adhesion: PLA/PBAT has low surface energy and usually requires a primer or corona treatment to achieve reliable printing. Both add cost, and the effect of the primer on compostability must be confirmed. Second, drying temperature: PLA hydrolyses more rapidly at high temperatures, so drying temperature and residence time cannot simply follow the settings used for traditional materials. Third, heat-sealing parameters: PLA has a narrow heat-sealing window, so printing and heat sealing should be validated together during the sample stage. Many biodegradable flexible packaging failures occur because the print is fine but cannot be sealed, or because the pouch develops leaks at the seal after three months.
How should we respond when a customer insists that the package must biodegrade in a domestic compost bin?
First, translate the request into a test standard. Mainstream industrial composting standards such as EN 13432 and ASTM D6400 test materials under constant-temperature industrial composting conditions at 58℃. Domestic composting uses a separate test method, and materials generally degrade much more slowly under household conditions. If the customer requires a domestic composting label, testing must be conducted separately by a laboratory with the appropriate qualifications; an industrial composting report cannot be substituted. The professional approach is to explain this technical fact, identify what the customer actually needs, such as material reduction, easier recyclability, or less consumer confusion, and propose several genuinely implementable options within the existing systems rather than simply saying it cannot be done.
📚 📚 Related Recommendations
Need a Custom Packaging Solution?
Learn more about packaging, or consult directly for a custom solution and quote
