Heavy Metal Limits for Express Packaging: 3 Practical Boundaries of GB 43352 — Total 100mg/kg / Solvent Residues 10mg/m² / Bisphenol A — The First 3 Questions to Ask When a Printer Receives an Express Box Inquiry
💡 💡 At a Glance
GB 43352-2023 is the first mandatory national standard for express packaging and took effect on 1 June 2024. In addition to a total of four heavy metals at ≤100mg/kg, paper packaging is subject to total solvent residues ≤10mg/m², benzene series ≤3, and AOX ≤5. Plastic packaging is also subject to total phthalates ≤1000mg/kg, while electronic waybills have a separate Bisphenol A limit of <200mg/kg. Applicability depends on whether the packaging enters the postal delivery channel, and every material in a composite structure must be declared and comply separately. Paper mill reports usually cover only heavy metals, so the printer must handle the residue-related testing items.
On 27 November 2023, the State Administration for Market Regulation and the Standardization Administration of China released GB 43352-2023, Limits for Heavy Metals and Specific Substances in Express Packaging, which took effect on 1 June 2024. It is China’s first mandatory national standard for express packaging.
The significance of “mandatory” is entirely different from that of an ordinary recommended national standard. Article 25 of the Standardization Law states that products and services that do not comply with mandatory standards may not be produced, sold, imported, or provided.
When printers receive inquiries for express boxes, express bags, or express mailers, they often treat them as ordinary packaging orders—discussing the number of corrugated layers, grammage, and printing process. Yet this standard governs an entirely different issue: at the moment the packaging enters the postal delivery channel, its heavy metal and specific substance content must fall within the prescribed limits.
The First Boundary: Applicability and Non-Applicability—Scope Determines Whether the Order Can Be Accepted
The scope of the standard covers express and mail packaging made from paper, plastic, and textile fibres. It does not apply to express packaging in direct contact with food.
Scope is only the first layer. In actual implementation, more detailed responsibility assignments must also be considered. The State Post Bureau has provided a highly practical checklist:
| Who Uses the Packaging | Who Is Responsible for Compliance |
|---|---|
| An e-commerce enterprise uses its own packaging to ship directly to consumers | The packaging of the e-commerce enterprise should comply with the standard |
| An e-commerce platform repacks goods and ships them to consumers | The packaging of the e-commerce platform should comply with the standard |
| A product manufacturer directly attaches a shipping label to protective packaging as a postal service agreement user | The product manufacturer’s protective packaging should comply with the standard |
| A “Handle with Care” label attached to the outside of express packaging | Not required to comply with the standard |
| Goods shipped to customers through a logistics channel | Not applicable |
| White EPS foam boxes, commonly used for agricultural and aquatic products in direct contact with food | Not applicable |
| Large-scale industrial logistics packaging | Not applicable |
This table is extremely valuable to printers because it turns “Should this order comply with GB 43352?” from a matter of guesswork into a question that can be asked directly. The same corrugated box may need to comply when used by an e-commerce platform for direct consumer shipments, while the large industrial-logistics packaging used by a food brand is not subject to the standard.
Customers often say, “We are just shipping ordinary express parcels.”
The printer should ask instead: “Are these packages being labelled and handed directly to a postal service provider, or will they be shipped through a logistics channel to the customer’s warehouse?”
There is also a hard requirement for composite materials: For composite express packaging products composed of multiple materials, producers must declare the type of each material, and each material must separately comply with the relevant requirements for paper, plastic, and textile-fibre express packaging. In other words, a composite bag cannot pass compliance through a single test of the finished product; every material layer must meet the applicable requirements individually. This directly affects the printer’s quotation because testing costs for composite structures are substantially higher than for single-material structures.
The Second Boundary: Limit Values—Different for Each Material and Type, Not One Universal Number
The standard divides materials into three major categories, each with different regulated items:
| Item | Paper | Plastic (Non-Biodegradable) | Plastic (Biodegradable) | Textile Fibre |
|---|---|---|---|---|
| Total of four heavy metals: lead + mercury + cadmium + chromium | ≤100 mg/kg | ≤100 mg/kg | ≤100 mg/kg | ≤100 mg/kg |
| Lead (Pb) | ≤50 mg/kg | ≤50 | ≤50 | ≤50 |
| Mercury (Hg) | ≤0.5 mg/kg | ≤0.5 | ≤0.5 | ≤0.5 |
| Cadmium (Cd) | ≤0.5 mg/kg | ≤0.5 | ≤0.5 | ≤0.5 |
| Chromium (Cr) | ≤50 mg/kg | ≤50 | ≤50 | ≤50 |
| Zinc (Zn) | — | — | ≤150 | — |
| Copper (Cu) | — | — | ≤50 | — |
| Nickel (Ni) | — | — | ≤25 | — |
| Molybdenum (Mo) | — | — | ≤1 | — |
| Selenium (Se) | — | — | ≤0.75 | — |
| Arsenic (As) | — | — | ≤5 | — |
| Fluorine (F) | — | — | ≤100 | — |
| Total solvent residues | ≤10 mg/m² | ≤10 | ≤10 | — |
| Of which: benzene series | ≤3 mg/m² | ≤2 | ≤2 | — |
| Bisphenol A (electronic waybills only) | <200 mg/kg | — | — | — |
| AOX (adsorbable organic halogens) | ≤5 mg/m² | — | — | — |
| Total DBP + BBP + DEHP phthalates | — | ≤1000 mg/kg | ≤1000 | — |
| Total DNOP + DINP + DIDP | — | ≤1000 | ≤1000 | — |
Once printers understand this table, they can identify three key points:
First, the three high-risk items for paper packaging are solvent residues, benzene series, and AOX. None is a heavy metal; all may be introduced during printing and post-processing. Solvent residues are directly related to inks and lamination, while AOX is usually associated with chlorine-containing flame retardants, certain adhesives, and paper mill additives. Compliance for paper express packaging therefore falls mainly on printing and post-processing, rather than the paper itself.
Second, the focus for plastic packaging is phthalates and solvent residues. Phthalates are plasticisers that may originate from plastic pellets, soft rubber, certain printing aids, and recycled material. Biodegradable plastic is additionally subject to limits for seven elements—zinc, copper, nickel, molybdenum, selenium, arsenic, and fluorine—because its formulations often contain more additives.
Third, electronic waybills are a separate category. The Bisphenol A limit applies only to electronic waybills and is set at <200 mg/kg. Electronic waybills use thermal paper with a different colour-developer coating system, so this item is regulated separately.
One more boundary involving common paper materials is worth remembering: Paper express packaging includes express mailers, packaging boxes, electronic waybills, and paper filling materials primarily made from kraft paper, coated white cardboard, corrugated paperboard, honeycomb paperboard, thermal paper, and other materials. Both corrugated paperboard and honeycomb paperboard are included, representing the express box materials printers handle most frequently.
The Third Boundary: Who Issues the Report and What the Printer Must Do—A Paper Mill’s Report Cannot Be Used as the Printer’s Report
This is the most common mistake printers make. Heavy metal limits apply to raw materials, but the list of regulated items also includes substances introduced during printing and post-processing.
Consider a sheet of corrugated paperboard. A paper mill can issue a heavy metal report covering heavy metals in the pulp and coatings. However, after receiving that report, the printer will print, varnish, laminate, punch, and bond the board. These processes may introduce new solvent residues and printing ink residues. For the finished product entering the postal delivery channel, solvent residues and AOX are the printer’s responsibility.
Printers must therefore take the following actions for orders of this kind:
- First, distinguish report ownership: Request the paper mill’s raw-material test report and verify whether it covers the total and individual limits for lead, mercury, cadmium, and chromium rather than solvent residues;
- List the items introduced by the printer’s own processes separately: Total solvent residues, benzene series, AOX, and Bisphenol A for paper-based electronic waybills are the printer’s responsibility;
- Narrow the material choices early in the quotation process: Whether to use solvent-based or water-based printing inks, what adhesive is used for lamination, and what adhesive system is used all directly affect solvent residues and AOX;
- Confirm the colour scheme before printing: Spot colours, fluorescent inks, and metallic inks may introduce additional regulated residues.
The professional value a printer can provide is to calculate and show the customer the gap between “a compliant sheet of paper” and “a compliant finished package.” This analysis often drives material changes more effectively than another test report.
The 3 Questions to Ask Before Accepting an Order
| Question | How to Ask | Why It Determines Whether the Order Can Be Accepted |
|---|---|---|
| 1. Will the packaging enter the postal delivery channel? | Will labels be attached directly for a postal service provider, or will the goods be shipped through a logistics channel to the customer’s warehouse? | This determines whether GB 43352 applies. Large shipments moving through logistics channels are outside the scope. |
| 2. What are the material type and structure? | Paper / plastic (non-biodegradable or biodegradable) / textile fibre? Is it a single material or composite? | This determines which limit values apply. Each material in a composite structure must also be declared and comply separately. |
| 3. Which items are covered by the customer’s raw-material report? | Does the paper mill’s report include solvent residues, benzene series, and AOX? Does it include Bisphenol A for electronic waybills? | This determines which tests and corrective actions the printer must undertake. Paper mill reports usually cover only heavy metals. |
Only after these three questions are answered can a printer provide an honest quotation, including testing fees, process change costs resulting from narrower material choices, and, where necessary, advice that the current material version cannot pass and its formulation must be changed.
It is also worth noting that the green transition in express packaging has advanced at a considerable pace: packaging standardisation across the industry has reached 86%; reusable packaging accounts for more than 10% of intra-city express shipments; green-certified packaging used by enterprises accounts for more than 5%; and recycled or reused cartons have reached 16.16 billion uses. The mandatory national standard, Requirements for Limiting Excessive Express Packaging, is also in effect. Express packaging for non-fragile items should not exceed 2 layers, while packaging for fragile items should not exceed 4 layers.
This means express packaging orders bring printers two opposing pressures: rising material and testing requirements on one side, and cost pressure to reduce material use and packaging layers on the other. Only printers that can calculate the impact of both pressures can establish a sustainable position in this market.
Further Reading
- 3 Practical Boundaries of the Requirements for Limiting Excessive Product Packaging—Packaging layers / void ratio / cost share
- The True Cost of 3 Packaging Void Ratios—Volumetric weight / loading rate / pallet layers
- How to Choose 3-Layer / 5-Layer / 7-Layer Corrugated Paperboard—Load-bearing capacity and cost
- 3 Practical Boundaries of Packaging EPR Producer Responsibility—Who registers / who pays / who is liable
FAQ
When did GB 43352-2023 take effect, and is it still in force?
It was released on 27 November 2023 and took effect on 1 June 2024. It remains in force, with the State Post Bureau as the competent authority and the supervising department. It is China’s first mandatory national standard for express packaging.
Must all express packaging comply with GB 43352?
No. According to State Post Bureau training guidance, packaging must comply when used for e-commerce platform repacking, e-commerce enterprises’ own packaging, or protective packaging used by product manufacturers acting as postal service agreement users. The standard does not apply to goods shipped to customers through logistics channels, white EPS foam boxes (commonly used for agricultural and aquatic products in direct contact with food), large-scale industrial logistics packaging, or externally attached “Handle with Care” labels.
Which limits for paper express packaging are introduced by the printing process?
The main items are total solvent residues ≤10mg/m², benzene series ≤3mg/m², and AOX (adsorbable organic halogens) ≤5mg/m². Heavy metals such as lead, mercury, cadmium, and chromium are mainly controlled at the raw-material stage, but paper mill reports usually do not cover solvent residues or AOX, so the printer must handle these items.
How can composite express packaging achieve compliance?
The standard requires producers to declare the type of each material in the composite express packaging, and each material must separately comply with the relevant requirements for paper, plastic, and textile-fibre express packaging. In other words, the finished product cannot pass through a single test; each material layer must meet the requirements and have its own compliance conclusion.
What are the 7 additional elements regulated for plastic express packaging?
Zinc (≤150mg/kg), copper (≤50), nickel (≤25), molybdenum (≤1), selenium (≤0.75), arsenic (≤5), and fluorine (≤100). These 7 items apply only to biodegradable plastic express packaging because such formulations generally contain more additives.
What packaging is subject to the Bisphenol A limit?
It applies only to electronic waybills for express shipments, with a limit of <200 mg/kg. Electronic waybills use thermal paper with a colour-developer coating system that differs from other paper products, so the standard establishes a separate limit for this category.
Can the customer’s paper mill test report be used directly?
It cannot be treated directly as proof of finished-product compliance. A paper mill report covers heavy metals at the raw-material stage, while solvent residues, benzene series, AOX, and other items may be introduced through the printer’s printing and post-processing. The printer must separately verify the testing items for which it is responsible; otherwise, a raw-material report would be passed off as a finished-product conclusion.
How should printers quote orders of this kind?
The quotation should separately list three areas: the cost of narrowing material options, including whether water-based inks, lamination adhesive, or adhesive systems must be changed; testing fees for items under the printer’s responsibility; and material revision recommendations where necessary. Showing the customer the gap between “compliant paper” and “compliant finished packaging” is more useful than attaching another report.
📚 📚 Related Recommendations
Need a Custom Packaging Solution?
Learn more about packaging, or consult directly for a custom solution and quote
