Digital printing

Digital Printing: “Multiple Substrates in the Same Order Batch” — Three Real-World Constraints in a Single Run: Setup Parameters, Waste, and Cleaning Costs for Paperboard, Corrugated Board, and Film

📅 2026-11-11 ✍️ Wuxi Lexiang Printing & Packaging ⏱ 3min read

💡 💡 At a Glance

Digital printing accepts orders such as: “One batch of orders includes color boxes, …”Corrugated boxes,When working on the three substrate types for flexible packaging films,If the quotation is calculated based on the cost of one sheet of paper,It will definitely be at a loss by the time it is delivered.Three types of real boundaries:I. Parameter boundaries—Different substrates require their own ICC characterization curves and drying curves,Paperboard, corrugation,The ink spreading and drying speeds of the film are completely different,Applying the same color curve to three different substrates will inevitably result in color deviation and poor drying;When changing the substrate, you must rerun the curve and test for drying.These are the labor hours that must be included in the quotation.II. Waste Boundary—Every substrate change entails a waste section (paper opening,Run curves,(the first sample for ink testing),Difference in sheet utilization (corrugated board calculated by sheet width,Film is calculated based on roll width,For cardstock, calculate the sheet imposition based on the finished product dimensions.The loss models of the three are completely different),and the reprinting resulting from the first-piece inspection failure;The loss rate must be calculated separately for each substrate.A single average cannot be used.III. Wash-Up Log — Switching from Four-Color Ink to a White Ink Base,or switch from absorbent paper to film,Cleaning requirements and residual risks are completely different.Thin films are more sensitive to residual solvents.The cost of washing may exceed that of printing itself.Real-world case study:Before accepting multi-substrate orders, first ask for three numbers—the minimum print run for each substrate,The individual loss rate for each substrate,And the cleaning time and cost of switching from one type of ink to another.

In April 2026, an e-commerce operations manager placed an order with a printing company for three types of packaging: a color box, a corrugated shipping carton, and a batch of flexible packaging bags.

Their exact words were: “You can print anything with digital printing. Give me a better price for all three together.”

When the printing company accepted the order, it estimated the price on the basis that using “the same machine and the same batch of ink counts as one machine startup.”

By the second week, problems began to emerge: the colors on the color boxes came out too yellow, the drying process for the corrugated cartons could not keep up, and the film bags were covered in layer upon layer of ink spots, as though the glass had not been wiped clean.

Ultimately, this order cost more than splitting it into three separate orders for two printing companies.

This is not a matter of capability, but of pricing logic. It is true that “one machine can print anything,” but this only holds if every substrate has stable parameters and sufficient volume.This article will break down the three cost components involved in switching substrates within a single order.

The First Boundary: Parameter Boundaries—Switching Substrates Is Equivalent to Switching Machines

The most valuable asset in digital printing is not the equipment, but the parameter library. For each commonly used paper type, a digital press needs a set of ICC profiling curves, which determine how colors are mapped to the ink spread on that paper, and a set of drying curves, which determine the drying temperature and speed. These two sets of parameters are the machine’s “understanding” of a particular material.

When the substrate changes, the previous understanding no longer applies.

  • Color boxes on coated paper or white cardboard—the surface is smooth and lightly coated, inkjet ink spreads according to consistent rules, and drying mainly relies on hot air. Once the curves have been developed, colors are stable and results are highly repeatable.
  • Corrugated board—the surface is uneven and has flutes; ink spreads very differently on the flute peaks and valleys. The drying path is “surface first, interior second”: moisture must pass through the fluted layer, so the hot-air settings must be considerably more conservative than for paper.
  • Film (PET/BOPP/PE)—it does not absorb ink, so the ink accumulates on the surface rather than penetrating it. Drying relies on heating rather than evaporation, while adhesion and heat-sealing windows belong to a separate parameter system.

Therefore, in the quotation, the labor hours for “developing curves + testing drying + producing first articles” for each substrate must be itemized separately. Experienced printing companies include this in their quotations: the first use of a particular substrate incurs a sample fee or engineering fee, because this is not simply printing; it is the process of learning a new material. If the customer refuses to pay this cost, the most likely outcome is one round of rework each for the corrugated and film portions.

Another detail is often overlooked: batch differences in substrates must also be handled from scratch.The sizing and moisture content of the same corrugated board type vary from batch to batch, and the whiteness of the same white cardboard type differs between batches. Even when the material has not changed and only a new batch of paper is being used, the drying curves still need to be fine-tuned. This has the same root cause as the problem of “matching colors across batches when completing an order,” but it occurs at an earlier stage—at the level of drying and ink spread, rather than color management—so modifying the ICC curves will not solve it.

One printing company’s approach is worth mentioning: it archives the parameter profile and first-article sample for each substrate together. The profile records the paper type, grammage, supplier, batch range, ICC curve number, drying settings, and feed speed. When the customer orders the same material again, the profile can be used directly, saving an entire half-day of setup time and a batch of waste.

The Second Boundary: Waste Boundaries—The Waste Models for Three Substrates Are Entirely Different

Waste in digital printing is not limited to “the few sheets wasted while adjusting the machine.” It has four sources, and the calculation differs for each substrate.

1. The waste segment during paper loading and curve testing.After the paper is loaded, curves and first articles must be run, and all the paper used during this stage is wasted. The amount of waste depends on the paper width and the length the machine runs, and corrugated board is the most expensive—because its unit price is high, and corrugated sheets cannot be spliced once they have been cut to a fixed length.

2. Sheet utilization.This is the figure that differs most between digital printing and traditional printing. Digital presses calculate production according to the paper width and sheet length, while imposition waste depends on how well the finished dimensions fit the available sheet area. Utilization is generally acceptable for cardboard color boxes, but if the dimensions of a corrugated box do not match the roll width, utilization can fall below 60%. For film, it depends on the roll width and the imposition method for the bag design. Utilization must be calculated separately for each of the three substrates; it cannot be glossed over with a single average.

3. Reprinting rejected first articles.If a first article comes out with a color deviation or inadequate drying, the quantity reprinted is usually a portion of the entire batch. This item is often recorded as zero when preparing a quotation, but it is a real cost.

4. Downtime losses.Switching substrates requires stopping the machine, cleaning it, reloading materials, and adjusting parameters, and the machine is idle throughout this period. The loss of machine efficiency in a multi-substrate order is usually greater than customers realize—if the press switches substrates three times within a single order, its effective operating time may be only half of the available time.

In practice, a printing company should prepare a separate “waste rate table” for each substrate, covering waste from paper loading, imposition waste, first-article reprints, and allocated downtime, and then total these costs. Showing this table to the customer is far more persuasive than merely stating that “the industry generally incurs 8% waste,” because it explains why the quotation for the corrugated board is so much higher than that for the color boxes.

There is also a portion that can be saved through production scheduling alone: grouping jobs that use the same substrate together.If the customer’s order includes five types of color boxes, two types of corrugated boxes, and one type of film, the five color-box jobs can be scheduled as one continuous run, with only one switch to corrugated board and one further switch to film. This reduces machine idle transitions from five to two. Printing companies that proactively suggest this will usually receive immediate approval from customers, because the delivery time is shortened as well.

The Third Boundary: Cleaning Costs—Where the Real Money Is Spent When Switching Substrates

Many printing companies assume that cleaning merely involves giving the machine a quick rinse. In reality, it is the most expensive item in a multi-substrate order, and its costs are hidden from view.

Cleaning requirements are determined by what comes before and after the current job, rather than by what the current job itself involves.There are three typical situations:

  • Switching from four-color inks to a white-ink underbase.White ink is the most difficult ink to wash out because its particles are coarse and settle quickly. If white-ink residue is not completely removed before printing process inks, those inks will look dirty and lose saturation. The machine time and cleaning-fluid consumption for this switch are typically three to five times those of an ordinary ink change.
  • Switching from absorbent paper to film.When the water-based ink from the previous job transfers onto the film, it carries paper fibers and impurities with it. Because the film surface does not absorb water, these contaminants adhere more firmly, requiring more intensive cleaning and generating more waste fluid.
  • Switching from dark inks to light inks.An incorrect cleaning sequence can leave residual color, which is most visible in light inks. The sequence matters: the usual procedure is to clean the dark ink thoroughly first, apply the light ink next, and use white ink last. This is not a step that can be omitted.

There is also a hidden cost: the disposal of cleaning fluid and waste ink. If digital-printing waste fluid is classified as requiring special disposal, the disposal cost can directly consume the profit on a multi-substrate order. Printing companies often overlook this when quoting, but environmental costs are real.

Can cleaning costs be saved? Yes, but not by skipping cleaning. There are two sound approaches: first, schedule jobs that require the same cleaning process together (for example, placing all jobs requiring a white-ink underbase in one run and avoiding transitions from process inks to white ink); second, use a “light-color transition” instead of a thorough wash—inserting an intermediate color between the dark and light inks. In some cases, this is faster than a complete wash. However, the latter carries quality risks and should only be used when the operator is confident, with the first article recorded for traceability.

One digital-printing company began using a “changeover cost table” in 2025: the horizontal axis shows the previous job’s ink color, the vertical axis shows the next job’s ink color, and each cell lists the estimated cleaning time and waste-fluid volume. Schedulers consult this table before assigning jobs and avoid the most expensive cells wherever possible. For multi-substrate orders, this table is more valuable than any procedure manual.

The First Three Questions to Ask Before Accepting a Multi-Substrate Order

The figure to determineWhat to ask the customerWhy it determines the structure of the quotation
The volume of each substrateHow many color boxes, corrugated boxes, and film bags are required? Calculate each separately.For low-volume substrates, the costs of developing curves and producing first articles cannot be spread thinly. They must be calculated separately or combined with a closely related substrate.
Whether the substrate is customer-specified or sourced by the printing companyWill the customer supply the paper, or will the printing company purchase it on the customer’s behalf? Is a specific brand required?If the customer specifies the paper, the likelihood of matching an existing parameter profile is low, because the curves must be readjusted whenever the batch changes, so the cost of developing the curves must be calculated separately.
Whether delivery is one-time or split into batchesCan delivery be split by substrate?Split delivery can reduce the number of substrate changes from three to one, since different batches already require one change each, resulting in lower overall costs.

Once these three figures have been clarified, the printing company should break down the original statement that “digital printing costs RMB 0.8 per sheet” in the quotation: printing labor charges should be listed separately by substrate, curve-development and first-article engineering fees should be itemized separately, waste rates should be listed separately for each substrate, and cleaning and allocated downtime for substrate changes should also be itemized separately.

When customers first see a quotation structured this way, their usual reaction is, “Why is this more expensive than other suppliers?” However, the printing company can provide a more practical comparison: another supplier’s price may exclude these items, resulting in two rounds of rework and a higher effective unit price, as well as a longer delivery time.

To return to the opening case, the e-commerce customer eventually split the order into two batches for delivery, with the corrugated boxes scheduled separately for one week. This actually saved 12% compared with producing all three items together and also brought the delivery date forward by five days. The correct solution for multi-substrate orders is usually not “print everything on one machine,” but “minimize the number of changeovers.”

Further Reading

#Digital printing #Multi-substrate printing #Paper change and cleaning #Corrugated direct printing #Thin-film printing #Digital loss

FAQ

There are three types of base materials in the same batch of orders. How should the quotation be broken down?

Organize into four sections by substrate:First, printing labor costs (per sheet or per square meter for each substrate),Second, the engineering costs for the initial use of this substrate (preparing the ICC curve,Measure dryness,Make the first piece),3. The loss rate for each substrate separately (sheet-cutting waste,Imposition waste,Reprinting of the first piece.Write the four items of downtime cost allocation separately),Fourth, the cleaning and downtime costs associated with changing the substrate.Finally, provide the customer with a consolidated total unit price.The benefit of splitting it this way is that the customer can see why the corrugated portion has a higher unit price—not because the printing plant is making more money, but…It’s that section that already has more fixed routines to allocate.Quote an average price.All losses incurred during rework are borne entirely by the printing plant itself.

Do you always have to rebuild the curve when switching substrates?

The same material,Same batch,When using the same supplier,You can invoke an existing curve,No need to rebuild every time.But three situations must be redone or fine-tuned:First, the supplier or model was changed (surface treatment,Glue dosage,The coating structure is different,the way the ink spreads changes);Second, a different batch was used (differences in the amount of sizing applied and moisture content will alter drying performance,This is especially apparent on the corrugated surface,Because corrugation drying relies on penetration rather than surface evaporation);Third, seasonal changes (the moisture content of paper varies greatly between the rainy season and winter,The drying curve needs to be adjusted.)The criterion is not “whether it is the same kind of paper,”Instead, these three parameters:Supplier,Batch, current environment.

Why is digital direct printing on corrugated board much more expensive than offset printing?

There are mainly three reasons.First, losses:The unit price of corrugated board is high,Fixed-length values cannot be concatenated,The loss in width utilization is directly multiplied by the cost of the expensive material.Second, drying:The drying path of the corrugation is from the surface to the interior of the flute core.The hot-air setting must be kept conservative,It won't speed up.The third is parameters:The corrugated surface is uneven.Ink spreads very differently on the peaks and valleys.Each type of corrugation (BC flute,AB tiles,E tiles) each require their own curves.Therefore, the real advantage of digital direct printing on corrugated board is not the unit price,As for lead time and minimum order quantity—no tooling setup is required,It can be made with just a few hundred boxes,Whereas offset printing requires paying plate-making fees.This bill should be calculated based on the number of orders,It is not possible to say in general who is cheaper.

Can the cleaning costs associated with changing substrates be reduced?

Yes, but the path is production scheduling rather than eliminating steps.The first item is to schedule production according to cleaning requirements:Group all items requiring a white ink base layer together in one section.Avoid switching from color ink to white ink, which is the most expensive transition;Inserting intermediate color transitions between dark and light colors can sometimes replace thorough cleaning,However, only a highly skilled and confident operator may perform the work, and the first-piece inspection record must be retained.The second point is to reduce the number of switches:Group workpieces made of the same base material together,One order involves three substrate material changes and one cutting operation,The effective operating hours of the machines may vary by a factor of two.The third item is to prepare the parameters in advance:Even before boarding, the curve…Drying settings,The first-piece plan is ready.Reduce downtime.It should be made clear thatYou can’t save costs by skipping washing—residue will directly cause discoloration and adhesion problems,The cost of rework is much higher than the cost of cleaning.

Can orders involving multiple materials be delivered in installments?

Yes, and it is often more cost-effective.Phased delivery (color box first,Back flute,(Another thin film) has two advantages:First, the total number of switches has actually not increased (there was already one switch per period).But other work can be fitted in between orders,Fill in the machine’s idle running time.Second, part of the customer’s payments can be made in advance;Good for both parties’ cash flow.In addition, staged delivery provides the printing plant with a natural checkpoint—if, after the first delivery, deviations are found in the parameters of a certain substrate,This can be corrected in subsequent issues.It won't be a complete overhaul like doing everything all at once.It should be noted that for installment deliveries, the quantity for each installment must be clearly specified in the contract,Acceptance criteria and final delivery deadline,and it is clear that “the time confirmed by the final batch shall prevail”Otherwise, disputes may easily arise later over whether the portion delivered early affected the portion delivered later.

Need a Custom Packaging Solution?

Learn more about packaging, or consult directly for a custom solution and quote