The “Ream” and “Color Ream” on a quotation: three real boundaries—how paper is counted / how colors are counted / how reams are converted; the first three numbers procurement should ask before reviewing a printer’s quotation
💡 💡 At a Glance
One ream = 500 full-size sheets = 1,000 printed sheets = 1,000 square meters; a color ream is a unit of paper consumption calculated by printing runs, and in offset lithography, one color ream = 1,000 folio sheets; the number of sheets cut from a full-size sheet is determined by the finished size: standard size 787 × 1092 mm, large size 889 × 1194 mm. The “including 5% spoilage” note on the quotation is another specification that must be clarified.
A purchaser came to me with a printing factory quotation:
“One company quoted 3.5 color tons, another quoted 2.8 color tons, and one is cheaper. Which one should I choose?”
I said, “You’re still missing two figures before you can compare.”
She was a little surprised. “It says 3.5 color tons right here. What else is missing?”
I said, “3.5 color tons is theamount of paper used,not thecost of the paper used.”You didn’t give me the price per ton of paper, nor the format in which the paper is supplied. Without these two figures, any comparison would give a false impression of how cheap it is.
These three figures form the most basic yet error-prone layer of a packaging quotation. The printer does not deliberately write them ambiguously; rather, this system of measurement was originally intended for reconciling accounts between printers. Procurement may understand the figures but still be unable to calculate with them, and if they cannot be calculated, they can only be led by the unit price.
Boundary 1: A “ream” is the unit used to measure paper—one ream = 500 sheets of full-size paper.
First, let’s clarify the most basic point.
One ream of paper consists of 500 sheets of full-size paper.There are three terms here that need to be distinguished:
“Full-size” refers to the paper’s original dimensions.The two most common sizes used in packaging printing are regular size, 787 × 1092 mm, and large size, 889 × 1194 mm. Their respective areas are 0.86 m² and 1.06 m². This figure is called theArea coefficientIt is the starting point for all subsequent paper price calculations.
A "ream" is a unit of quantity.500 full-size sheets = 1 ream. Each side of a full-size sheet counts as one printed sheet, so 1 ream = 1,000 printed sheets. Because the remainder is not easy to calculate by the ream, the industry uses"fang"to record the remainder: 1 ream = 2 fang, and 1 printed sheet = 1 fang. The benefit of this system is that it converts the ream's base-5 system into a base-10 system: 5 reams and 200 sheets cannot be written as 5.2 reams; they must be written as 5.4 reams.
A "ream weight" converts reams into weight.The formula is:Let weight per ream (kg) = area of one sheet (m²) × 500 × basis weight (g/m²) ÷ 1000For example, with a larger sheet size: 1.0615 m² × 500 × 70 g/m² ÷ 1000 ≈ 37.15 kg. In other words, one ream of 70 g paper in the larger size weighs approximately 37 kg.
Once the weight per ream is known, the paper price can be calculated backward:Number of reams per ton = 1000 ÷ weight per reamThenPrice per ream = price per ton ÷ number of reams per ton.
Using the same example: larger sheet size, 70 g, price of 6,000 yuan per ton, approximately 26.91 reams per ton, price per ream = 6,000 ÷ 26.91 ≈ 223 yuan; then divided by 500,Each full sheet costs about 0.446 yuan.Calculating directly using the area coefficient gives the same result: 1.0615 × 70 × 6000 ÷ 1,000,000 ≈ 0.446 yuan.
When purchasing, take this table and compare it with the quotation. The first thing to confirm is:Whether the paper price in this quotation is calculated on this basis, what the ton price is, and the paper’s grammage.Even when both are “3.5 color reams,” there is a 25% difference between using 6,000-yuan paper and using 7,500-yuan paper.
Boundary two: “color reams” refers to the number of printing passes, not the number of colors.
The term “color ream” is most commonly misunderstood. A common misconception is that the number of colors printed determines the number of color reams.
That is incorrect.A color ream is a unit of paper consumption calculated by the number of printing runs (that is, how many printing plates are prepared and how many times the paper passes through the press): 1 ream printed once equals 1 color ream, printed twice equals 2 color reams, and so on.
The customary standard for offset lithographic printing is the “folio”:1 color ream = printing 1,000 folio sheets, also called “a thousand folio impressions.”
This definition directly determines two matters that must be clearly distinguished when purchasing:
First, a color ream refers to the number of printing runs, not the number of colors.For a four-color printing job, if the four colors are printed on four separate plates, it counts as 4 color reams (under the folio specification). However, if all four colors are printed in a single pass (as digital printing or certain presses can do), the paper passes through only once, so the number of color reams is not counted as 4.Even when printing the same four colors, the number of color reams may differ completely.This is why quotes for different printing processes cannot be compared by unit price alone.
Second, if the same job has front and back versions, the color impressions must be doubled.Printing each side once means two press passes, so paper consumption is calculated as two passes. Therefore, when procurement sees “4 color impressions,” they must confirm whether it means 4 passes on one side or 4 passes on each side.
There is also one detail that is particularly easy to overlook:Color impressions include spoilage.Actual paper consumption is never a neat whole number because the imposed sheets may not fill a full signature, proofing wastes sheets, and setup requires register alignment. Therefore, the number of color impressions often includes decimals—“3.5 color impressions” means paper consumption equivalent to 3.5 sheets of full-scale folded thousand-sheet printing. This decimal portion represents spoilage. Writing “including 5% spoilage” on the quotation, or including it directly in the color-impression count, represents two different quotation conventions.
The second figure procurement should ask for when reconciling the order is here:Whether the color-impression figure is a theoretical value or includes spoilage, what spoilage rate is used, and whether it is included in the paper price or the quantity.If one supplier quotes theoretical color impressions while the other includes spoilage, a direct comparison will show a difference of 5% to 10%.
Boundary 3: The "fold count" determines the sizes of paper you can get.
The third number is the fold count. This is the easiest to understand and the most useful.
The fold count is how many sections a full sheet of paper can be divided into.A full sheet folded once becomes half-size, folded twice becomes quarter-size, and so on with eighth-size and sixteenth-size. The finished size is not equal to the sheet size because the printing machine has to grip and feed the paper, and the paper's edges cannot be printed on.Finished size = Sheet size − Trim size.
The common fold-count reference table is as follows (standard size 787×1092, large size 889×1194):
| Fold count | Finished size (mm) | Finished size (mm) |
|---|---|---|
| 2 units | 540×780 | 590×880 |
| 4 units | 390×543 | 440×590 |
| Chapter 8 | 270×390 | 295×440 |
| Unit 16 is open. | 185×270 | 220×295 |
| Episode 32 | 185×135 | 220×145 |
The most direct use of this table is todetermine whether the sheet size reported by the printing plant is sufficient.
A classic problem: The client wants a cover for a 185×270 mm booklet, which is ISO 16-fold. If the printing plant uses a larger sheet, the full-size 16-fold on the larger sheet is 220×295, so it can be trimmed to size. However, if the client wants a full-bleed finished size of 220×295, the larger 16-fold sheet trims out exactly, while the ISO 16-fold sheet is only 185×270, short by a full 16-fold size. This is not merely a trimming issue; two sheets would have to be joined.
There is another issue directly related to cost:If the wrong sheet size is chosen, imposition efficiency collapses.Machines generally use only a few standard sheet sizes. If a special size is used, the paper cannot be printed edge to edge, wasting the cost of an entire sheet. Therefore, Lao Zhou advises clients as follows:Unless truly necessary, try not to use special sizes other than those listed in the sheet-count table.
The third question the buyer should ask during reconciliation is:Whether this quotation uses standard or large-size paper, what the sheet count is, and whether the printing is full coverage.For the same printing plant, the difference between standard and large-size paper is not 5%, but the 23% between the area coefficients of 0.86 and 1.06.
Combine these three layers: a quotation sheet that can be reconciled.
Back to the buyer from the beginning. She had two quotations in hand and asked three rounds of questions in this order, only to discover a 12% difference:
In the first round, she asked about the paper:What type of paper, what price per ton, what basis weight, and standard or large size.The first company uses 250 g white cardboard, while the second uses 230 g white cardboard. The unit prices look close, but the actual paper area differs by 23%.
In the second round, ask about:The number of colors, whether waste is included, and where waste is calculated.The first company's quoted color run includes 5% waste, while the second company's quote is based on the theoretical value.
In the third round, ask about:The number of pages per signature, how many signatures fit on a sheet, and whether the sheet is fully used.To save paper, the first company fit 6 signatures on a sheet, while the second could only fit 4.
She said, "If I had known to ask these three numbers in the beginning, I could have distinguished the two companies in the first round."
Actually, these three numbers correspond to three different things:Where the paper comes from (area and price), how many times the machine runs (number of press passes), and how many sheets are cut from each sheet (utilization rate).If the calculation criteria differ at any level, the final unit price is unreliable.
Lao Zhou's advice to the purchasing team is:When reviewing a quotation, do not look at the unit price first. First, identify the three anchor points: paper price, color order, and sheet size.Only once the anchor points are aligned can the unit prices be compared.
Further Reading
It is recommended to cross-reference several other types of terminology on quotations:Those hard-to-understand terms on the packaging quotationExplaining what startup fees, release quantities, and spoilage rates are each covering;Three hidden costs arising from deviations in packaging paper grammageExplaining the cost when the actual grammage does not match the nominal grammage;Differences among four types of coated paper: 80g, 100g, 120g, and 157g grammageExplaining how changes in grammage specifically affect printing characteristics;Unit conversions on packaging drawingsExplaining four types of measurement units: mm, cm, inch, and pt;What components make up the packaging cost?Instead, the paper price is considered within the overall cost table.
FAQ
How many sheets are in one ream? What is the relationship between “reams” and “sheets of paper”?
One ream = 500 fully opened sheets = 1,000 impressions = 1,000 square units. The reason for using “square units” is that the remainder is difficult to calculate in reams (5 reams and 200 sheets cannot be written as 5.2 reams; they must be written as 5.4 reams). Using square units converts the base-5 ream system into a base-10 system and makes it easier to correspond directly to the number of impressions.
Is the color quota calculated by the number of colors?
No. Color units are calculated by the number of print runs (how many plates are used and how many times the press passes the sheets): one ream printed once equals 1 color unit, and printed twice equals 2 color units. Offset lithography uses the full sheet as the unit of measurement. One color unit equals 1,000 full sheets printed, also known as a thousand full-sheet impressions. Therefore, when printing four colors, using four separate plates on the press equals four color units, while printing them all in a single pass does not.
Are “3.5-color orders” and “including 5% loss” the same thing on a quotation?
No. The decimal portion included in the color allowance often represents waste. “3.5 color allowances” may refer to the actual paper consumption after including waste, whereas “including 5% waste” is a different pricing basis. When reconciling accounts, it is essential to clarify whether the color allowance is a theoretical value or includes waste, how the waste is calculated, and whether it is included in the paper price or the quantity. Otherwise, differences in pricing conventions between the two parties can result in a discrepancy of 5% to 10%.
How much does standard size differ from large size paper?
The area differs by 23%: regular size is 787 × 1092 mm, with an area factor of 0.86; large size is 889 × 1194 mm, with an area factor of 1.06. With the same grammage and the same price per ton, each sheet of large-size paper costs 23% more, so unless the quotation clearly specifies regular or large size, the unit prices cannot be compared.
How do you use sheet-folding calculations? What is the relationship between the finished size and the number of sheets?
The folding count indicates how many sections a full sheet can be divided into: one fold is folio, two folds is quarto, three folds is octavo, and so on. Finished size = paper size − trimming size, because the printing machine grips and feeds the paper, so the edges cannot be printed. Folding count table: standard 16-fold is 185 × 270 mm, and large 16-fold is 220 × 295 mm.
Why does choosing the wrong edition cost more money?
Because machines usually use only a few standard paper sizes, wasting a sheet of specially sized paper by failing to fill the print run causes the imposition efficiency to plummet. Common scenario: The customer needs a finished size of 185 × 270 mm, which can be produced with a 16K sheet in standard size; switching to a larger sheet for imposition may instead result in an incorrect size or require two sheets to be joined.
How to calculate ream weight?
Ream weight (kg) = area of a single sheet (m²) × 500 × basis weight (g/m²) ÷ 1000. Example: For a large-format sheet measuring 1.0615 m² with a basis weight of 70 g/m², one ream weighs approximately 37.15 kg. Then use “reams per ton = 1000 ÷ ream weight” and “price per ream = price per ton ÷ reams per ton” to calculate the paper price.
What should you look at first when reviewing a packaging quotation?
Don’t look at the unit price first. First, find three reference points: paper price (including the price per ton, basis weight, and standard or large size), color requirements (number of color impressions and whether waste is included), and trim size (size, how many pages share a sheet, and whether the sheet is filled). Once these three reference points are aligned, the unit prices are comparable; otherwise, you’re comparing prices calculated on different bases.
📚 📚 Related Recommendations
Need a Custom Packaging Solution?
Learn more about packaging, or consult directly for a custom solution and quote
