Cigarette Packaging Labeling: 3 Practical Boundaries—Warning Area 35% / Type Height 4.5mm / Color Difference ΔE≥40—Which 3 Numbers Should a Printer Check First When Accepting a Cigarette Pack Order?
💡 💡 At a Glance
Domestic cigarette packaging is not required to display warning graphics, but it has strict numerical requirements: the warning area must occupy at least 35% of both the front and back panels; pack warning text must be at least 4.5mm high; “Notice from Our Company” must be at least 4.0mm high; and the color difference between warning text and background must satisfy ΔEab≥40—not the print-color-difference value of 1.5. Hei typeface is mandatory, while Chinese characters for smoke-emission parameters have a separate 2.0mm minimum. The second and third warning groups must rotate annually, and export versions must be designed separately according to the destination market. Before accepting an order, check 3 numbers: area ratio, type size, and ΔE.
On 22 January 2017, the State Administration for Market Regulation and the State Tobacco Monopoly Administration jointly issued the Provisions on the Labeling of Cigarette Packaging for Sale in the People's Republic of China, repealing the 2009 edition. To this day, these provisions remain the sole basis for labeling cigarette packaging sold domestically in China.
Interestingly, when many people first read these provisions, they look for a “warning graphic”—and after failing to find one, they assume they have misunderstood. The provisions genuinely contain no graphic requirement.
In 2003, China joined the Framework Convention on Tobacco Control. Article 11 of the Convention requires health warnings to “occupy a principal visible surface of 50% or more, but in no case less than 30%, and may be or include pictures or pictograms.” Note that the wording is “may be,” not “shall be.” When the provisions were revised in 2017, the competent authorities increased the number of warning groups from the original number to 3 groups of 6 warnings and adjusted the area requirement from “not less than 30% of the principal visible surface” to “not less than 35% of the surface on which they appear.” Nevertheless, they still did not require graphics to be printed.
Every year, members of the National People's Congress submit the same recommendation: printing images of rotten feet or diseased lungs on cigarette packs. The competent authorities have responded that existing packaging already meets the requirements of the Convention and relevant domestic laws and regulations. The State Council has also clarified that the Convention does not limit the form in which health warnings and information must be presented by each party and does not mandate the use of pictorial warnings.
Consequently, cigarette packaging sold in China has developed a particularly distinctive status: warning text is a hard requirement, while graphics are not. This is the first factual judgment a printer must establish when accepting a cigarette pack order.
The First Boundary: Warning Area—35% of “the Surface on Which It Appears” Does Not Mean 35% of the Front Panel
Article 4 provides that the warning area should be located on the front and back of strip and pack packaging and should occupy an area not less than 35% of the surface on which it appears. Its background may use a single background color from the original trademark area.
This provision contains 3 levels, and a printer that misses any one of them will calculate the warning area incorrectly.
First, it covers two panels—the front and back, not just the front. A cigarette pack has four side panels (front, back, left, and right), and the warning area must occupy 35% of each of the front and back panels. Many printers are accustomed to laying out one panel at a time, resulting in a warning area on the unfolded carton artwork that is only half the required size.
Second, the requirement is 35% of “the surface on which it appears.” The decisive factor is the final cigarette pack dimensions. The warning area must be calculated using the dimensions of the finished pack, not the unfolded dimensions or the sheet size. For a pack 85mm high, the minimum warning-area height on the front is 85×35% ≈ 29.75mm, with the same calculation applying to the back.
Third, the background may use a single background color from the original trademark area. This gives printers some operational flexibility: the warning area may retain the existing background color of the trademark area without adding a separate color block. However, it must be a “single background color”—not a gradient, not a textured background, and not text placed over a multicolored image.
Article 5 also specifies the location: the warning area on pack packaging should be located at the bottom or on the right side of the surface on which it appears, while the warning area on strip packaging should be located on the right side or at the bottom of the surface on which it appears. The positioning rules are provided separately for the two formats.
Article 6 requires that the words “Notice from Our Company” be marked at the top of the warning area on the front of the package. These 4 Chinese characters themselves occupy part of the warning area, but because they must appear at the top, they cannot be placed on the same line as the main warning text.
The Second Boundary: Type Size and Color Difference—4.5mm and ΔE≥40 Are Independent Requirements
Article 7 establishes 3 sets of figures:
| Item | Strip Packaging | Pack Packaging |
|---|---|---|
| Warning text height | Not less than 7.0mm | Not less than 4.5mm |
| Type height for “Notice from Our Company” | Not less than 6.5mm | Not less than 4.0mm |
The type requirements are also specific: text within the warning area should be clear, legible, conspicuous, and easy to identify, and the type should be Hei typeface. The provisions directly specify the type category. This is the biggest difference between cigarette packs and most ordinary packaging: an ordinary packaging customer may request Song typeface or a proprietary brand font, but this is not an option for cigarette packs. Hei typeface is explicitly required by law.
Article 8 also regulates another type size: information on smoke constituents and emissions, including tar, nicotine, and carbon monoxide. The height of Chinese characters must not be less than 2.0mm. This requirement is frequently overlooked. These smoke-emission parameters are printed on the sides of the pack rather than on the main display panel, but they are still Chinese characters and still subject to the 2mm minimum.
The final sentence of Article 7 is the easiest to overlook: the color difference between the warning text and the warning-area background must satisfy ΔEab≥40.
This is not the same ΔE used in print-quality standards. During print-quality inspection, common industry acceptance thresholds are ΔE 1.5 / 2.0 / 3.0, whereas this provision requires 40. The former measures how closely a print matches the supplied color sample; the latter establishes how far the text and background must differ for the warning to remain clearly readable. These figures differ by 3 orders of magnitude, so confusing them can cause serious problems.
In practice, ΔEab≥40 generally means that warnings should use black text on a light background, or reversed white text on a dark background. If the customer supplies a layout with dark text on a dark background, or uses a low-contrast brand color as the warning-area background, the printer should reject it before printing. Once the package has been printed, the printer cannot correct the problem.
The Third Boundary: Prohibited Terms and the Distinction Between Domestic and Export Versions
Article 9 provides a list of prohibited terms in 3 categories, all of which are prohibited on the package and in any accompanying instructions:
First, efficacy claims relating to cigarette ingredients, including “healthcare,” “therapeutic effect,” “safe,” “environmentally friendly,” and “low harm.” Second, quality descriptions relating to cigarettes, including “light flavor,” “ultra-light flavor,” and “mild.” Third, descriptive terms, including “medium and low tar,” “low tar,” and “low tar content.”
For printers, these terms usually do not originate in copy written by the printer. They appear in the creative artwork supplied by the customer. If the printer accepts them without objection and prints them, liability may fall on the printer. This check must therefore become a formal prepress inspection action: every time the artwork is revised, these terms must be scanned again rather than checked only once.
There is also a rule concerning the second and third warning groups: the second and third groups of warnings must be used in rotation within the warning area on the back of the package. For cigarettes of the same brand, specification, packaging, and barcode in market circulation, the strip and pack packaging must each year alternate or simultaneously use 2 different groups of warning identifiers, without requiring one-to-one correspondence between the warnings on the strip and pack packaging.
The word “annually” is the most consequential element of this requirement. It means that a customer's cigarette pack artwork is not printed once and used for several years; it may change once or even twice a year. The printer's production schedule must therefore be aligned with the customer's artwork update cycle.
As for the distinction between domestic and export versions, this is a special system in China's cigarette packaging. Cigarettes sold in China must comply with the Tobacco Packaging Provisions; cigarettes intended exclusively for export must comply with the laws and regulations of the destination country or region and must be packaged according to the requirements of the export destination. For the same brand, the warning content, area, and layout of the domestic and export versions may be entirely different, because the generally accepted rule in international trade is that imported and exported products must comply with the legal requirements of the country or region where they are sold. For export orders, a printer cannot simply take the domestic artwork, change the barcode, and use it.
The 3 Numbers to Check Before Accepting an Order
| Number to Check | How to Calculate | Consequences of a Calculation Error |
|---|---|---|
| 1. Percentage of the panel occupied by the warning area | Calculate the front and back of the finished pack separately, with a minimum of 35% for each | Omitting the back reduces the warning area; calculating from the unfolded artwork inflates the ratio |
| 2. Type heights for the warning and “Notice from Our Company” | Pack: 4.5mm / 4.0mm; strip: 7.0mm / 6.5mm | Insufficient type height is non-compliant; Chinese characters for smoke-emission parameters have a separate 2.0mm minimum |
| 3. ΔEab between the warning text and background | It is 40, not the print-color-difference value of 1.5 | Confusing the 2 ΔE requirements leads to the wrong acceptance standard, and even the sample may fail |
These 3 numbers must be checked rather than left until the customer approves the artwork because they are all physical quantities the printer can determine during prepress. The 35% is a geometric calculation, 4.5mm is a type-size setting, and ΔE 40 is a color-sample comparison. None requires waiting for a physical sample. Anything left until the sample stage means wasting a sample run, revising the artwork again, and unnecessarily occupying production equipment.
The real professional value a printer brings to this type of order is not simply whether it can print a cigarette pack, but whether it can tell the customer as soon as the creative artwork arrives that the warning area on this version is still short by several square centimeters when calculated across the front and back panels. The customer's design company may not proactively make this judgment because it usually focuses on the front-panel rendering.
Further Reading
- Digital Foil and Pantone 1655 ΔE Control: 3 Practical Cases—How to distinguish 2 ΔE standards
- What ΔE Color Difference Is Acceptable for Printed Products? 3 Judgment Standards
- How Small Can Text Be on Packaging? 3 Type-Size Standards—Process limits / readable viewing distance / differences between user groups
- 4 Types of Orders Suited to Gravure Printing—Why high-volume, long-run cigarette pack orders depend on gravure
FAQ
Must cigarette packs sold in China display warning graphics?
No. The 2017 revised Provisions on the Labeling of Cigarette Packaging for Sale in the People's Republic of China require 3 groups of 6 text warnings but do not require graphics. Article 11 of the Framework Convention on Tobacco Control, to which China is a party, states that warnings “may be or include pictures or pictograms,” which is not mandatory. Members of the National People's Congress submit recommendations for pictorial warnings every year, and the competent authorities respond that existing packaging already complies with the Convention and relevant domestic regulations.
Which panels are used to calculate the warning area?
Calculate the front and back of the strip and pack packaging separately, with each occupying not less than 35% of the surface on which it appears. A cigarette pack has front, back, left, and right panels, so calculating only the front is the most common error. Using unfolded-artwork dimensions or sheet size is also incorrect; calculations must use the final finished pack dimensions.
Is the ΔEab≥40 requirement for warning text the same as print color difference ΔE?
No. ΔEab≥40 measures the legibility of warning text against the warning-area background and is a mandatory packaging-labeling requirement. Common print-color-difference thresholds of ΔE 1.5 / 2.0 / 3.0 determine whether printed output matches the color sample. The figures differ by 3 orders of magnitude, and confusing them directly leads to the wrong acceptance standard.
Is the warning typeface specified for cigarette packs?
Yes. Article 7 expressly requires text in the warning area to be clear, legible, conspicuous, and easy to identify, using Hei typeface. This is one of the few cases in which packaging-labeling regulations directly specify a typeface. If the customer's creative artwork specifies a brand font, the printer must return it for correction.
Do the 4 Chinese characters in “Notice from Our Company” count toward the warning area?
Yes. Article 6 requires them to be marked in the warning area on the front of the package and positioned at the top of the warning. Their type height must be not less than 6.5mm for strip packaging and not less than 4.0mm for pack packaging. They occupy warning-area space but cannot be placed on the same line as the main warning text.
Must a cigarette pack design for the same brand change within a year?
Yes, rotation is required. The second and third groups of warnings are used in rotation within the warning area on the back. For cigarettes of the same brand, specification, packaging, and barcode, the strip and pack packaging must each year alternate or simultaneously use 2 different groups of warning identifiers, without requiring one-to-one correspondence between the strip and pack. The printer's production schedule must align with the customer's annual artwork-update cycle.
Can a domestic cigarette pack artwork be used for an export order by simply changing the barcode?
No. Cigarettes intended exclusively for export must comply with the laws and regulations of the destination country or region and must be packaged according to that destination's requirements. Warning content, area proportions, and graphic requirements vary considerably by country—for example, US 21 CFR 1141.10 requires warnings to occupy at least 50% of both the front and back panels and mandates specified graphics. Domestic and export versions are 2 separate designs.
Should a printer act when a customer's creative artwork contains terms such as “light flavor” or “low tar”?
Yes. Article 9 prohibits the use of terms such as “healthcare,” “therapeutic effect,” “safe,” “environmentally friendly,” “low harm,” “light flavor,” “ultra-light flavor,” “mild,” “medium and low tar,” “low tar,” and “low tar content” on the package or in accompanying instructions. These terms generally originate in customer artwork rather than printer copy, but liability may still fall on the printer if they are printed. The check should therefore be formalized as a prepress inspection action performed every time the artwork is revised.
📚 📚 Related Recommendations
Need a Custom Packaging Solution?
Learn more about packaging, or consult directly for a custom solution and quote
